# Custom DVE

**URL:** <https://rossvideo.community/t/custom-dve/12819>\
**Category:** Production Switchers\
**Created:** [September 26, 2016, 7:24pm UTC](https://rossvideo.community/t/custom-dve/12819 "2016-09-26T19:24:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jeffbins\_1](https://rossvideo.community/letter_avatar_proxy/v4/letter/j/57b2e6/32.png) [@jeffbins\_1](https://rossvideo.community/u/jeffbins_1)\
**Post date:** [September 26, 2016, 7:24pm UTC](https://rossvideo.community/t/custom-dve/12819/1 "2016-09-26T19:24:00Z")

</div>

I know I have done this before in training but have not had a need to do so since. I have a 2 box setup with a camera shot and CG. I would like to come back to the camera shot using a DVE transition to bring that box fullscreen. I am just blanking on how you set it up.

---

<div class="post-metadata">

**Author:** ![jameshope](https://rossvideo.community/letter_avatar_proxy/v4/letter/j/ba8739/32.png) [@jameshope](https://rossvideo.community/u/jameshope)\
**Post date:** [September 27, 2016, 4:43am UTC](https://rossvideo.community/t/custom-dve/12819/2 "2016-09-27T04:43:00Z")

</div>

You’ll need to use an effect dissolve for that. The quickest way to do it is:

- recall the memory that provides the boxes

- turn off the key that shows the CG

- reset the key that the camera shot is in to make it full screen again (just press the “Reset Key” button on the multipurpose button area - top left of panel)

- set your memory to store as Effect Dissolve (even set a transition time in there too; easiest to do this in Dashboard)

- save the memory

Then, you can recall the 2 box memory, then recall this new memory, and it should move to full screen. That’s provided you have recall set to “Memory” or “Effects Dissolve”.  
[#Carbonite](https://livinglive.community/search?s=tags%3A%22Carbonite%22&executesearch=true)