# Tenths of a second via DataLinq

**URL:** <https://rossvideo.community/t/tenths-of-a-second-via-datalinq/13152>\
**Category:** XPression\
**Created:** [November 18, 2026, 5:36pm UTC](https://rossvideo.community/t/tenths-of-a-second-via-datalinq/13152 "2026-11-18T17:36:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![peterrichards](https://rossvideo.community/letter_avatar_proxy/v4/letter/p/839c29/32.png) [@peterrichards](https://rossvideo.community/u/peterrichards)\
**Post date:** [November 18, 2026, 5:36pm UTC](https://rossvideo.community/t/tenths-of-a-second-via-datalinq/13152/1 "2026-11-18T17:36:43Z")

</div>

I am trying to set up an on-screen bug for sports broadcasts fed from the scoreboard. The scoreboard is a Daktronics All Sport 5000 and it is feeding into Graphics Outfitters equipment (ScoreIP to Score Bridge running on the Xpression). In Score Bridge I can see the tenths of a second tick off correctly, but when it gets to Xpression, I only get about two updates per second. I am using Graphics Outfitters recommended JSON feed into DataLinq as an RSS/HTTP source. The settings point to a URL provided by Score Bridge which is the local Xpression computer. I have tried different update intervals, but I get the same results. I have tried several other ways to feed the data to DataLinq and if it worked, it was no better than the json file. I am at a loss on this one.

---

<div class="post-metadata">

**Author:** ![simonredmile](https://rossvideo.community/user_avatar/rossvideo.community/simonredmile/32/4102_2.png) [@simonredmile](https://rossvideo.community/u/simonredmile)\
**Post date:** [November 18, 2026, 9:06pm UTC](https://rossvideo.community/t/tenths-of-a-second-via-datalinq/13152/2 "2026-11-18T21:06:46Z")

</div>

Do you have a way to look at the data as it hits the PC within windows other than Datalinq to compared?
