Profile

Colin Light

Contact Details

My Content

1 to 11 of 11 total

RE: GRAPHITE Xpression and ROSS supplied DASHBOARD UI

Posted By Colin Light 04-21-2021 07:31
Found In Egroup: Production Switchers \ view thread
In case the upload doesn't work I'm also adding the OGLML here, you can create a new panel and open it in edit mode 'Ctrl + G' ( 'Cmd + G' for Mac ) double click on the panel and select the source tab then copy and paste to over write the existing markup with this:

RE: GRAPHITE Xpression and ROSS supplied DASHBOARD UI

Posted By Colin Light 04-21-2021 07:25
Found In Egroup: Production Switchers \ view thread
It's possible to create a custom panel which locks the layout by adding the following param to the config: Where the id's are 0,1,2,3 which represent Small, Medium, Large, List respectively. I have attached an example panel, you will need to change the IP and port of the objectId to match your ...

RE: DashBoard Panel to control Trackless Studio

Posted By Colin Light 06-16-2020 13:16
Found In Egroup: Facility Control \ view thread
Hi Shane, Do you have access to the Trackless Studio User Guide ( version 2 ) ? this has some basic information about getting set up with DashBoard. Also if you need some further resource on DashBoard itself you can view them on the Ross website: https://www.rossvideo.com/produ ...

RE: attribute functions' buttons to control web browser frame

Posted By Colin Light 05-11-2020 08:09
Found In Egroup: Facility Control \ view thread
Hi JOÃO, if I understand you correctly the issue you are having is the encoded brackets e.g. tags nested inside the I hope this helps Colin. #DashBoard

RE: attribute functions' buttons to control web browser frame

Posted By Colin Light 05-06-2020 09:15
Found In Egroup: Facility Control \ view thread
Hi JOÃO, You can use the YouTube embed tag with the DashBoard browser, for example: This will display a video with auto play switched off and you will have access to the normal YouTube player controls e.g. play, pause and scrub. I believe this is also configurable so you can switch ...

RE: Dashboard Custom Panel - Carbonite

Posted By Colin Light 03-30-2020 10:53
Found In Egroup: Facility Control \ view thread
Hi Stephen, did the link Dan posted help you with this problem? This method of drag and dropping elements is the best way to generate custom panels from the Carbonite config panel. It will allow you to get up and running quickly and you can then edit the OGLML to customize the panel to your ...

RE: UDP String

Posted By Colin Light 03-27-2020 10:35
Found In Egroup: Facility Control \ view thread
Hi Jeff, will be encoded to but this should still send encoded chars and you should get on the other side. I've created a quick example for you to test UDP sending and receiving. You will need to have two instance of DashBoard running to do this which on windows is relatively straight ...

RE: Knowing you've reached the end of a MessageParser

Posted By Colin Light 03-24-2020 10:20
Found In Egroup: Facility Control \ view thread
Hi Simon, I'm not aware of another method, I've used similar code to parse files using ogscript.createFileInput which works well, for example : var parse = true; do ( try( var str = fileInput.readLine(); )catch( error )( parse = false; ) ) while ( parse == true); thanks Colin. ...

RE: Dashboard clock to pause at a specific time

Posted By Colin Light 03-23-2020 10:18
Found In Egroup: Facility Control \ view thread
Hi Sam The quickest and easiest way would be to create two states for the Stop button to check to see if the timer is running. I've updated your code and added my example code below. thanks Colin. ogscript.debug( "START" ); var timeToStop = params.getValue( "timer.to.stop", ...

RE: Dashboard clock to pause at a specific time

Posted By Colin Light 03-20-2020 15:44
Found In Egroup: Facility Control \ view thread
Hi Sam, with a bit of ogscript code you can hook up a timer task to monitor the current timer. Here's an example that runs a timer and will pause at 5 and 10 seconds. If you open the debug window you can see the timer output and messages appearing at these points. You can create a new ...

RE: Search by DataLinq content from Dashboard

Posted By Colin Light 03-10-2020 11:25
Found In Egroup: Facility Control \ view thread
Hi Dan, you can load csv files into DashBoard to get the data into a table to display the list of delegates. You can also fire take commands via RossTalk to bring a selected take id on air in XPression. It's also possible to save the Excel file as a CSV and bring it into XPression, you can ...