Profile

RE: Carbonite USB content transfer via FTP

Posted By Kian Sedighi 12-08-2021 10:34
Found In Egroup: Production Switchers \ view thread

Correct it is FAT32 formatted. It's the original one from years ago. I do see now it is USB 3.0. Thought I read somewhere yesterday 2.0 is desired? I may try a different USB flash drive and see if that does anything. If not, contact support at provided path. ------------------------------ Kian Sedighi ...

Carbonite USB content transfer via FTP

Posted By Kian Sedighi 12-07-2021 21:09
Found In Egroup: Production Switchers \ view thread

Hello all, I'm having a problem moving content onto the switcher USB using an FTP connection. I can copy content from the USB to the computer through the connection but not the other way around. I've tried the FTP connection on two different machines with same result. I get a gray "no" symbol (circle ...

RE: ME/MiniME setup

Posted By Kian Sedighi 10-20-2021 16:01
Found In Egroup: Production Switchers \ view thread

Okay, thanks for the confirmation on that suggestion Les. ------------------------------ Kian Sedighi ------------------------------

ME/MiniME setup

Posted By Kian Sedighi 10-19-2021 19:31
Found In Egroup: Production Switchers \ view thread

I am back to the very basics on this question. After years of learning on and using the configuration originally setup, I've realized as I learn more, that there are more efficient and powerful ways to use our Carbonite+ frame / Carbonite Black panel with regards to ME/MiniME setup. Obviously everything ...

RE: Carbonite double cut

Posted By Kian Sedighi 06-28-2021 11:27
Found In Egroup: Production Switchers \ view thread

Thanks for the quick response Les. I'll continue to try to be more mindful of how I rest on and actuate the button. It's rare but does happen so I had to ask the question. ------------------------------ Kian Sedighi ------------------------------

Carbonite double cut

Posted By Kian Sedighi 06-28-2021 10:55
Found In Egroup: Production Switchers \ view thread

#Carbonite Hi guys, I am looking for some insight on functionality that would help eliminate the accidental, infamous double cut. A number of times over the years, I've found some sweet spot in pressing the cut button, where when I make the cut, lets say to cam2 from cam1, the cut happens and almost ...

RE: Field dominance selection

Posted By Kian Sedighi 03-10-2021 19:33
Found In Egroup: Production Switchers \ view thread

Thanks Les. Sounds to me like I am not going to really notice anything different then. Logically, if I had to choose one today, sounds like Both would make the most sense. #Carbonite

Field dominance selection

Posted By Kian Sedighi 03-10-2021 18:21
Found In Egroup: Production Switchers \ view thread

Hello all, I'm curious about the Field Dominance selection under System setting. It is currently set on Field 2 and has been since I've worked with this already setup switcher. I am not sure the reasons why that was selected or what I could expect to observe differently if I were to select Field 1 or ...

RE: Cut transition

Posted By Kian Sedighi 11-26-2018 00:31
Found In Egroup: Production Switchers \ view thread

Thanks guys. I'll take a look at both of these things tomorrow and see what I have! #Carbonite

Cut transition

Posted By Kian Sedighi 11-25-2018 20:24
Found In Egroup: Production Switchers \ view thread

I have a pretty basic question regarding the cut transition. Noticed today when pausing our capture playback at a random moment that I had a blend of a close and wide shot. Seems that I paused right at my cut point. Obviously for the ME and Keys, frame rates can be set for the dissolve but I've not seen ...

RE: Carbonite internal clock

Posted By Kian Sedighi 11-01-2018 20:43
Found In Egroup: Production Switchers \ view thread

Appreciate the response Les #Carbonite

Carbonite internal clock

Posted By Kian Sedighi 11-01-2018 19:21
Found In Egroup: Production Switchers \ view thread

Curious if anyone has experienced any issue with the internal Carbonite clock with respect to losing time since the latest upgrade (Frame Version 13.0.2, Panel version 1.4.512)? While not grossly off, still approximately 1-2 second loss per week estimated. We use to use the tool to begin our ...

Kian Sedighi

Contact Details