Profile

Garrett Strudler

Contact Details

My Content

1 to 12 of 12 total

RE: Crosspoints Status

Posted By Garrett Strudler 12-18-2023 21:14
Found In Egroup: Facility Control \ view thread
Great, thank you for this. Thanks for the update on the salvos as well; they have been intermittent in use, and oddly enough I was just talking to someone else (Jason Tait) about salvos from Dashboard and he also recommended using the RossTalk GPI command instead. Took me a while to figure out why ...

RE: Crosspoints Status

Posted By Garrett Strudler 12-14-2023 18:32
Found In Egroup: Facility Control \ view thread
Hi @Daniel Bailey, sorry for the delay. Here's what I've got currently for a single listener along with some buttons that trigger salvos. The listener gets the correct source upon launching the panel the first time on the Ultritouch, but does not track changes after that. Slot 0 Ultrix" ...

RE: Crosspoints Status

Posted By Garrett Strudler 12-07-2023 03:00
Found In Egroup: Facility Control \ view thread
@Daniel Bailey I'm attempting to use this code for a similar project but have run into a couple issues I'm hoping you can help with. For context, this is to add crosspoint status to a custom Dashboard panel for a 2U Ultritouch. When I first load the panel it will retrieve the correct source ...

RE: Carbonite Proc Amp selection & control from Ultritouch (Dashboard Custom Panel)

Posted By Garrett Strudler 08-28-2023 14:10
Found In Egroup: Facility Control \ view thread
Excellent info, thanks James! My coding skills are not great, but I think I should be able to figure my way around enough to make this work. I'm going to make my way through the Development Guide as well in case I want to add things like scrolling pages to give me more layout options, but this definitely ...

Carbonite Proc Amp selection & control from Ultritouch (Dashboard Custom Panel)

Posted By Garrett Strudler 08-21-2023 23:12
Found In Egroup: Facility Control \ view thread
Is there a way to select and control different input Proc Amps / Color Correctors for a Carbonite from a single Dashboard Custom Panel (for use on an Ultritouch)? When I copied over the various required elements from the Carbonite DB panel to a new Custom Panel, the input selection doesn't work (just ...

RE: Detecting when a Carbonite source is in preview or on-air

Posted By Garrett Strudler 08-17-2021 15:13
Found In Egroup: Facility Control \ view thread
Thanks so much! Obviously I had to sub out the IP and MAC addresses, and for some reason the OID of Program on my Ultra is 0xE06, but with the Inspector it was fairly easy to find. I'm getting the expected messages back in the debug, so now I'm just working on the integration of ogscripts from another ...

RE: Detecting when a Carbonite source is in preview or on-air

Posted By Garrett Strudler 08-15-2021 00:29
Found In Egroup: Facility Control \ view thread
I'm a total novice with Dashboard and scripting, but am looking to do the same thing. I understand the basic concepts here (I think), but could use some more step-by-step guidance on retrieving the source information from a Carbonite (Ultra) and using that to fire off discrete scripts depending on which ...

RE: Feature Request - Status and Flush/Purge for Media Store RAM

Posted By Garrett Strudler 08-19-2020 00:40
Found In Egroup: Production Switchers \ view thread
Thanks for the quick reply Les. I must have always cued items when I've tried in the past so I couldn't edit them (which makes sense now that I think about it). For me it hasn't been a big issue as I just update the few custom controls that need it, but that tip will save a little hassle in the future. ...

Feature Request - Status and Flush/Purge for Media Store RAM

Posted By Garrett Strudler 08-18-2020 22:31
Found In Egroup: Production Switchers \ view thread
Feature request - It would be great to have a little more insight and control over the Media Store RAM, which currently is a bit of a black box. I would suggest on the Status page in Dashboard similar to how you can see your DVE resource allocations, there would also be a status for how full the ...

RE: Media Store Channel freezing on cut frame of an animation

Posted By Garrett Strudler 05-07-2020 13:29
Found In Egroup: Production Switchers \ view thread
Just to follow up on this, I just discovered in the Media Manager there is a separate “Thumb Frame” that can be adjusted for each clip. By default it looks like this will be the same as the cut frame if you’ve set it up for a media wipe, but you can go in and manually change this (there’s a separate ...

DVE allocation priority?

Posted By Garrett Strudler 03-21-2020 01:46
Found In Egroup: Production Switchers \ view thread
Does anyone know how the switcher allocates DVE resources once you hit the limit (8)? I was recently on a show (with a Black Plus 12G, v12 software) and pushing the limits of the DVE's, but didn't have time to figure out exactly how/where it decides to steal resources from. A quick observation seamed ...

RE: Media Store Channel freezing on cut frame of an animation

Posted By Garrett Strudler 03-21-2020 01:19
Found In Egroup: Production Switchers \ view thread
I was recently on a Black Plus 12G running v12 software and I'm almost certain there is a "cue to frame 1" for each media store you can insert into a Custom Control, which I believe is what you're looking for. So then you'd probably end up with something like: load clip #, set keyer source, cue to frame ...