Profile

ME1 selection disappeared when pressing ME select button

Posted By Tonu Blank 02-22-2018 10:14
Found In Egroup: Production Switchers \ view thread

User buttons were assiged for ME selection between ME1 and MiniME 1-4 on the Carbonite Switcher. Yesterday, it was found that when press ME1 user button, the ME1 select key lost, there were only MiniMEs keys and MultiScreen keys for selection. Please find the attached photo. The user button "ME1" ...

RE: RAVE Tally output behavior is strange

Posted By Tonu Blank 01-25-2018 07:25
Found In Egroup: Production Switchers \ view thread

Hi Les, we are surely connect the port with "Tally" labeled. it should not be GPIO, unless there is wrong labeling on the RAVE unit. Moreover, we haven't configure the GPIO setting on the Graphite, and when we press the crosspoint buttons, it there is reaction on the 25-pin Tally port. ...

Visual Logic do not have "if-then-else" process

Posted By Tonu Blank 12-05-2017 15:18
Found In Egroup: Graphics \ view thread

In Visual Logic interface, I cannot find the if-then-else process. If I need to work out this process, what can I do? For Example, I live data from Datalinq, if the value=A, then then object will move up 900 pixels, else, object will move down 400 pixels. I cannot find a way to work it ...

Panel Buttons for MiniME on Carbonite 1-A Panel

Posted By Tonu Blank 06-22-2017 03:02
Found In Egroup: Production Switchers \ view thread

A customer has a Carbonite Switcher with Carbonite 1-A (1ME) panel (not Black), after upgrade the software, there is MiniME function, but we don't know which panel button can call the MiniME1-4 function. Please advise.

RE: Timecode count down pause issue for XPression Sequencer

Posted By Tonu Blank 03-31-2017 09:14
Found In Egroup: Graphics \ view thread

Hello, I have not got any update on this case? Is there anybody following up? Please advise. Regards, Tony #XPression

RE: MultiView Scale

Posted By Tonu Blank 03-28-2017 10:16
Found In Egroup: Production Switchers \ view thread

The overscan issue of Multiviewer is complained by customer for years since CrossOver series switcher. On Carbonite, our work-around is turn off the border of each MV window, and use label tally instead of box tally. But this work-around is not accepted by all customers, because there ...

Timecode count down pause issue for XPression Sequencer

Posted By Tonu Blank 03-20-2017 05:02
Found In Egroup: Graphics \ view thread

Hello, We've tried to arrange a video play list in XPression Sequencer. Normally, we see the timecode count down of the clip item during the clip is playing. However, when we assign the In/Out effect to the clips, the timecode count down will pause itself. For example, if I set In effect ...

Focus and Iris of POVITCam cannot be controlled by Carbonite Black Solo

Posted By Tonu Blank 03-18-2017 12:52
Found In Egroup: Production Switchers \ view thread

Hello, We've connected the PIVOTCam to the Carbonite Black Solo (CBS), it can control the Pan and Tilt by the joystick. However, we found that the focus and iris cannot be controlled on CBS. And the zoom is not sensitive, sometimes not responding when turn the button of zoom. Is there ...

RE: Xpression Clip Server

Posted By Tonu Blank 02-24-2017 06:20
Found In Egroup: Graphics \ view thread

Jeff, Clip server function is already embedded in V6.0 or later version of XPression Studio software. So first of all, you should run the correct version. Secondly, you should pay attention to the license issue. XPression Clip server requires XPN Studio multi channel edition and with ...

RE: Preview Section of Sequencer Interface

Posted By Tonu Blank 02-20-2017 14:35
Found In Egroup: Graphics \ view thread

Hi Brian, well noted with thank. #XPression

Preview Section of Sequencer Interface

Posted By Tonu Blank 02-19-2017 09:28
Found In Egroup: Graphics \ view thread

From the attached picture, we can see the info display box is beside the preview window of the Sequencer Interface. Is there a way to move the info display box to the bottom of the preview section? Some customers found that the old version XPression interface shows the scene info under the preview. ...

Does INCoder/Video Coder support XDCAM .mxf and AVC Intra video file??

Posted By Tonu Blank 02-06-2017 15:56
Found In Egroup: Graphics \ view thread

A customer has asked that can INCoder/ XPN Video Coder transcode XDCAM/AVC-Intra to XPN Codec? We have tried to install Sony XDCAM Viewer on our XPRession Demo unit, but the XPN Video Coder cannot recognize the XDCAM .mxf file. Is it possible to make the Video Coder or INcoder can transcode ...

RE: GPIO of Carbonite

Posted By Tonu Blank 09-14-2016 05:18
Found In Egroup: Production Switchers \ view thread

Thanks Les, it is working with contact closure now. #Carbonite

GPIO of Carbonite

Posted By Tonu Blank 09-01-2016 02:49
Found In Egroup: Production Switchers \ view thread

When we set the GPIO interface as GPI input, is it a passive circuit or active circuit? When I send GPI trigger from external device to Carbonite frame, I should give it a contact closure or a +5V DC level?

RE: DB showing "Max Connection Exceeded" to the new added OG3 Frame

Posted By Tonu Blank 08-30-2016 02:22
Found In Egroup: Facility Control \ view thread

I see. #DashBoard

DB showing "Max Connection Exceeded" to the new added OG3 Frame

Posted By Tonu Blank 08-29-2016 09:49
Found In Egroup: Facility Control \ view thread

I have added a new frame to the network, but the Dashboard shows me "Max connections exceeded", see the attached photo below. I am using Dashboard v7.0. I found the following description in the Dashboard user guide. Orange "” This color indicates that the MFC-8300 Network Controller Card for that ...

Tonu Blank

Contact Details