Profile

David Levy

Contact Details

My Content

1 to 20 of 50+ total

RE: NK-GPI and Dashboard

Posted By David Levy 02-18-2022 17:18
Found In Egroup: Connectivity \ view thread
Joe, we had a port on our network switch that needed a kick in the butt, we're all good now. Thank you for the help, just knowing that the NK-NET needed to be online was great info. ------------------------------ Dave Levy WWSB Engineering ------------------------------

RE: NK-GPI and Dashboard

Posted By David Levy 02-18-2022 16:07
Found In Egroup: Connectivity \ view thread
Joe, Thank you for the reply. We've had the NK Router for a while now, but we haven't used it yet, so it's essentially a new install. I'm going to have to troubleshoot why it's not showing online as I wasn't the one who racked it. Thanks again, and if I figure it out I'll post on here. If I ...

NK-GPI and Dashboard

Posted By David Levy 02-17-2022 17:25
Found In Egroup: Connectivity \ view thread
Does anyone know how to customize the NK-GPI using Dashboard, or otherwise? I do not have an NK-IPS, but I'm told I can hook up the NK-GPI directly to our NK-3G16's second T-BUS port. When I do this and try to use Walkabout in Dashboard, I find our RCP-ME but nothing else. I should also note ...

RE: Reset IP Address on OGX Frame

Posted By David Levy 10-24-2018 13:33
Found In Egroup: Infrastructure​ \ view thread
Thank you very much! #openGear

Reset IP Address on OGX Frame

Posted By David Levy 10-24-2018 02:14
Found In Egroup: Infrastructure​ \ view thread
Does anyone know how to reset the IP address to factory default on an OGX frame with networking? One of mine has lost its way and I can't connect to it.

RE: Effects Dissolve Questions

Posted By David Levy 01-04-2017 02:59
Found In Egroup: Production Switchers \ view thread
OK, riddle me this: I do a State command that does the Effect Dissolve at 9 frames (again, anything higher and it jumps), AND all the keyer information turned off. When I run that event they stay off. But when I run the next event, a Memory Recall of the effect, they all get turned back on. I thought ...

RE: Effects Dissolve Questions

Posted By David Levy 01-03-2017 21:33
Found In Egroup: Production Switchers \ view thread
I just checked and the Memory Recall ME1K1 - ME1K4 are all set to Memory, as are most of the other settings. The Recall Mode Attrib is also set to Memory Value. On the Store side, Recall Mode Attrib is set to PGM Value. I'll call Tech Support when I can, without seeing it I imagine this is extremely ...

RE: Effects Dissolve Questions

Posted By David Levy 01-03-2017 15:35
Found In Egroup: Production Switchers \ view thread
What is the difference between the two modes? If it's on Memory, it will recall what was saved, correct? What does Always Recall do? Honestly, this was not explained very well when we had training 5 years ago, and the switcher has been working the way it was set up, so we didn't change it. ...

Effects Dissolve Questions

Posted By David Levy 12-29-2016 05:00
Found In Egroup: Production Switchers \ view thread
I have two questions about using Effects Dissolve on the Carbonite. 1> I figured out how to use the Dashboard to create a custom control that uses Effects Dissolve, but I can only do 9 frames or less on the transition. If I do anything above that it jumps partway through the move to the end. Is ...

RE: Using Scripting to Change Database Query

Posted By David Levy 08-27-2016 15:44
Found In Egroup: Graphics \ view thread
My awesome engineers figured it out. We don't have OnBeforeOnline, we are on V5.7. But they figured out how to make a data key. Thanks for all your help!! #XPression

RE: Using Scripting to Change Database Query

Posted By David Levy 08-26-2016 17:32
Found In Egroup: Graphics \ view thread
OK, Garner, two more questions. I was off the last 3 days and am just now getting back to this. Here are my questions: 1. What do I do with the datalinq object in Visual Logic. Do I put the query in exactly how it is in the script, or does it stay blank? As it is, the query is being put in the ...

RE: Using Scripting to Change Database Query

Posted By David Levy 08-23-2016 21:49
Found In Egroup: Graphics \ view thread
You are the best! Thanks' #XPression

RE: Using Scripting to Change Database Query

Posted By David Levy 08-23-2016 21:05
Found In Egroup: Graphics \ view thread
Thanks Garner. We'll look into it. One of my engineers is familiar with scripting, so hopefully he'll understand more than me. Since I don't quite understand, let me ask this... if we put: SELECT RaceCandidateDisplayName,RaceCandidateVotes,ROUND(RaceCandidatePercentVotes,0),RaceCandidateWinner ...

Using Scripting to Change Database Query

Posted By David Levy 08-19-2016 20:31
Found In Egroup: Graphics \ view thread
Is there a way to use scripting, or even Visual Logic, to change the parameters of a database query? We're trying to set up an election FS using ENPS Stats. The data that ENPS pushes out doesn't include anything we can use as a Title or Subtitle for the FS, so we're querying the Race ID. But that ...

Crashing Designer and Studio - HELP!

Posted By David Levy 07-05-2016 20:35
Found In Egroup: Graphics \ view thread
So, I've been working on a way for us to keep CGs in throughout a story for News, and I don't have Transition Logic available on v.5.7 ... I've built scenes on different layers to accomplish this, but I keep crashing my Studio box. It seems to only crash after I've reloaded the project. After ...

RE: Recording Xpression RossTalk commands to Carbonite Custom Controls

Posted By David Levy 06-25-2016 04:11
Found In Egroup: Production Switchers \ view thread
Works like a charm :) Thanks @lesoreilly #Carbonite

RE: Recording Xpression RossTalk commands to Carbonite Custom Controls

Posted By David Levy 06-24-2016 20:37
Found In Egroup: Production Switchers \ view thread
Thanks, @lesoreilly , I'll check that out! #Carbonite

RE: Recording Xpression RossTalk commands to Carbonite Custom Controls

Posted By David Levy 06-24-2016 20:12
Found In Egroup: Production Switchers \ view thread
Thanks Garner, What about clearing every layer on a specific framebuffer? On the panel there's no option for all layers. I haven't checked the Dashboard for that yet. #Carbonite

Credits with Dissolve Instead of Roll/Crawl

Posted By David Levy 06-19-2016 04:49
Found In Egroup: Graphics \ view thread
Does anyone have any thoughts on how to do credits where the text dissolves in and out, instead of doing a roll/crawl? I've built a scene using Stagger Animations, where the person's title dissolves in, then 10 frames later the person's name dissolves in. Then they dissolve out together while ...

RE: Visual Logic Help

Posted By David Levy 06-14-2016 03:15
Found In Egroup: Graphics \ view thread
Never mind @bford ... I figured it out... Just needed another And function block and to make the 2 Line Headline visibility dependent on the Top Line being Greater than 40 AND the bottom line EQUAL TO 0. Thanks! #XPression