Profile

Bruna Gregorio

Contact Details

My Content

1 to 20 of 28 total

RE: Ultricore BCS and Mediornet

Posted By Bruna Gregorio 02-23-2022 09:42
Found In Egroup: Connectivity \ view thread
Hello Mike, Yes, I'm trying to add another MediorNet to my system and I would just like to confirm that I just need to add it on the Outgoing Connections and then on the Third Party Matrices, right? I already have a MediorNet with 692 SDI outputs, so if I add another one it would double this ...

Ultricore BCS and Mediornet

Posted By Bruna Gregorio 02-21-2022 15:10
Found In Egroup: Connectivity \ view thread
Hello, I'm working with Ultricore BCS and Mediornet and I was wondering if I could add another Mediornet under the "Connections" tab because the system always work with a redundant equipment. Just wanna make sure that it will work and it is the same proccess to add another equipment or if there ...

USB Controller

Posted By Bruna Gregorio 08-24-2021 15:07
Found In Egroup: Facility Control \ view thread
Hello, I have a Furio VR100 head here and I'm trying to control it through a USB Joystick. I read the User Manual and followed the steps but apparently the Joystick is connected but not controlling the VR100, I already added the Game Controller, the Tilt Parameter and the Pan Parameter (Mapped ...

RE: Panel Password

Posted By Bruna Gregorio 08-16-2021 13:57
Found In Egroup: Facility Control \ view thread
Hello Anand, Alright I see your point. Thank you so much for your time and help! Have a great day and thank you again! ------------------------------ Bruna Gregorio ------------------------------

RE: Panel Password

Posted By Bruna Gregorio 08-16-2021 13:19
Found In Egroup: Facility Control \ view thread
Hi Anand, Thank you so much for taking time to help us. We were able to open that panel, but it's not quite what we're trying to do. The goal is to make sure the operator only sees the panel and don't change anything. So now I'm gonna ask you about the Tree View, we tried to remove the Carbonite ...

RE: Panel Password

Posted By Bruna Gregorio 08-16-2021 09:52
Found In Egroup: Facility Control \ view thread
Hello Anand, Thank you so much, it helped us a lot. I have one more question for you, is it possible to restrict the View tab? So no one can click on it or if they do they would need a password. Thank you so much! ------------------------------ Bruna Gregorio --------------------- ...

RE: Panel Password

Posted By Bruna Gregorio 08-13-2021 11:28
Found In Egroup: Facility Control \ view thread
Hello Anand, So there's nothing we can do so the operator won't use a panel they're not supposed to? It doesn't have to be an actual password. Thank you! ------------------------------ Bruna Gregorio ------------------------------

Panel Password

Posted By Bruna Gregorio 08-13-2021 10:44
Found In Egroup: Facility Control \ view thread
Hello, I have a question about security and privacy policy, so what I need is to put a password on the Carbonite Virtual panel, so after I press F11 it won't leave the screen and whoever is operating the panel isn't able to see the tree view or the DashBoard Interface, they would only see the Carbonite ...

RE: #XPression and DashBoard

Posted By Bruna Gregorio 07-26-2021 09:12
Found In Egroup: Facility Control \ view thread
Hi Dave, sorry to bother you again, Do you have any updates on my case? I'm more invested on this panel because we will be showing to clients so we want everything to be working great. Thank you! ------------------------------ Bruna Gregorio ------------------------------

RE: #XPression and DashBoard

Posted By Bruna Gregorio 07-19-2021 13:52
Found In Egroup: Facility Control \ view thread
Hello Dave, Thank you for your time! So I replaced the 0 in the code with a different value and it worked, but I was trying to use the 2 buffers ID. We have an example project (Ross News Hour) where we use two different framebuffers and I would like to use them both. On the Sequencer the buffer ID ...

RE: Carbonite Virtual Panel

Posted By Bruna Gregorio 07-15-2021 11:33
Found In Egroup: Facility Control \ view thread
Hi Jos, That was exactly what I was trying to do! Thank you, now the Bus Map on the Soft Panel is the way I wanted it to look like. Thank you so much for your time and help! ------------------------------ Bruna Gregorio ------------------------------

RE: #XPression and DashBoard

Posted By Bruna Gregorio 07-14-2021 16:02
Found In Egroup: Facility Control \ view thread
Hello Dave, I'm back because I'm having an issue with the KeyPad and I believe you could help me. So everything was working ok but when I have a project where I use 2 framebuffers, when I put a take ID and it's supposed to play on Framebuffer 2 it automatically goes to Framebuffer 1 when I press ...

RE: Carbonite Virtual Panel

Posted By Bruna Gregorio 07-13-2021 10:08
Found In Egroup: Facility Control \ view thread
Hello Jos, So I was able to change the names of my Master Panel on the Personality tab but I was hoping to change it on the Virtual Panel as well and that's what I'm struggling with, I don't know where to go to change the button names on the Virtual Panel. Could you help me please? Thank you! ...

RE: Carbonite Virtual Panel

Posted By Bruna Gregorio 07-12-2021 09:49
Found In Egroup: Facility Control \ view thread
Hello Antony, Thank you! It's working now. I actually have another question about the Virtual Panel, so I changed the background and preset buttons names on the Bus Map and it updated on the actual panel but not on the Virtual Panel, do you know how I can link them together so whenever I change ...

Carbonite Virtual Panel

Posted By Bruna Gregorio 07-08-2021 12:03
Found In Egroup: Facility Control \ view thread
Hello, I've been having issues with DashBoard because when I try to add the Carbonite Virtual/Soft Panel on there and I put the 5257 Port, it automatically changes to the 5253 and it gives me the frame. I'm not quite sure what is going on and I was hoping someone would help me. Thank you. ...

RE: MIRA and Dashboard

Posted By Bruna Gregorio 07-02-2021 09:43
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Marsha, I'm back because I'm facing issues with Mira, so it's not working anymore, two days ago it was working just fine, yesterday it wouldn't open on the first try and today it isn't working at all. As I showed you before the sub-nodes Replay and Explorer don't appear for me even though it's ...

RE: MIRA and Dashboard

Posted By Bruna Gregorio 06-29-2021 12:01
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Marsha! I actually have a question about MIRA, I've been wanting to open the Playlist Editor and the Channel's playlist on my DashBoard computer but I'm not really sure how to do that of if even it's possible. I can only open on the Mira Explorer. Could you help me please? ----------- ...

RE: MIRA and Dashboard

Posted By Bruna Gregorio 06-29-2021 10:16
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi, After downloading the Abekas OGP and following the steps Marsha sent, it's working now. ------------------------------ Bruna Gregorio ------------------------------

RE: MIRA and Dashboard

Posted By Bruna Gregorio 06-29-2021 10:14
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Marsha! Thank you so much! It is working now, I didn't have the Abekas OGP on this computer, but it's all working. Have a great day! ------------------------------ Bruna Gregorio ------------------------------

MIRA and Dashboard

Posted By Bruna Gregorio 06-28-2021 13:25
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hello! I've been trying to create a custom panel where I could place the MIRA playlist on it but when I connect the MIRA it doesn't show anything on my DashBoard computer. It shows it's connected but nothing appears. I'm not sure what is wrong I already tried to disconnect and connect again but it ...