Profile

Ryan Edwards

Contact Details

My Content

1 to 20 of 25 total

RE: Triggering Harmonics Video Server Using Carbonite

Posted By Ryan Edwards 03-13-2019 11:07
Found In Egroup: Production Switchers \ view thread
Is there any information in regards to Dashboard VDCP, like a tutorial or written manual? Thanks, Ryan #Carbonite

RE: Triggering Harmonics Video Server Using Carbonite

Posted By Ryan Edwards 02-26-2019 12:35
Found In Egroup: Production Switchers \ view thread
I was doing some more research on Harmonics Spectrum X playback supported automation protocols. Again, I am trying to streamline playback functionality through my Ross Carbonite to the Harmonics Spectrum X playback device. These are the supported communications: Polaris Advance, Polaris Elite, ...

RE: Effects Dissolve on multiple memories

Posted By Ryan Edwards 02-08-2019 18:22
Found In Egroup: Production Switchers \ view thread
I was reading this post, and trying to replicate the exact difference between Orange and Blue. I understand the premise of recalling exactly the way the memory is saved with Orange, however how is it different when switched to blue? If I save a two box with a background in Media Storage 4, I can ...

RE: Device Control of BlackMagic Video Server

Posted By Ryan Edwards 02-08-2019 15:45
Found In Egroup: Production Switchers \ view thread
perfect, thank you joseph #Carbonite

RE: Device Control of BlackMagic Video Server

Posted By Ryan Edwards 02-06-2019 03:07
Found In Egroup: Production Switchers \ view thread
Thanks Les, appreciate the help. Just to clarify, do I need to set up the BMD to listen to that specific Carbonite port designated for Generic Rosstalk like I would for an AMP device? Or do I need to just set the BMD to remote mode as shown in the video? And as long as it's a newer BMD ...

Device Control of BlackMagic Video Server

Posted By Ryan Edwards 02-05-2019 23:11
Found In Egroup: Production Switchers \ view thread
I have a client who wants to run transitions off a Blackmagic video server. I've built Carbonite device control for XPression and ProVideoServer (AMP Protocol) through Carbonite. I've never even seen a Blackmagic device, but I've heard it connects via RossTalk. Is there any information regarding device ...

RE: Triggering Harmonics Video Server Using Carbonite

Posted By Ryan Edwards 10-19-2018 19:15
Found In Egroup: Production Switchers \ view thread
I know the Carbonite is technically only supposed to automate with Yamaha audio boards, but do you think there is any chance the same setup procedure would work with a Calrec audio board? #Carbonite

RE: Triggering Harmonics Video Server Using Carbonite

Posted By Ryan Edwards 10-19-2018 18:38
Found In Egroup: Production Switchers \ view thread
Thanks Les, As a side note, I am trying to set up a GPI trigger from Master Control to fire a Custom Control. Is there anything I would need to know, or is it as simple as just assigning (and hard wiring) say input 34 to a GPI that is instructed to trigger said Custom Control. Like is there any ...

Triggering Harmonics Video Server Using Carbonite

Posted By Ryan Edwards 10-17-2018 00:07
Found In Egroup: Production Switchers \ view thread
I am currently running a Harmonics video server through Dalet, and was wondering if there was any information in regards to playback triggering through Carbonite. Before I had set up ProVideoServer using AMP, and was wondering if there was a similar setup, or really any information in regards to Harmonics ...

RE: Connecting Cambot to Carbonite

Posted By Ryan Edwards 10-15-2018 21:24
Found In Egroup: Production Switchers \ view thread
thanks, works great #Carbonite

Connecting Cambot to Carbonite

Posted By Ryan Edwards 10-06-2018 00:14
Found In Egroup: Production Switchers \ view thread
Hi, I'm having difficulty connecting my Ross Carbonite to my camera via CamBot Controller. I've followed the steps listed in the Online Carbonite Device setup. It seems the Carbonite is pinging, however I'm still unable to take control of the camera from the joystick or knobs. I guess I was hoping ...

Should you regularly delete unused items from the Clip Store Manager?

Posted By Ryan Edwards 06-21-2018 17:48
Found In Egroup: Graphics \ view thread
Is it a good idea to regularly go through the Clip Store Manager and delete unused items, does it matter in maintaining performance? If so, is there a way in v6.5 to prevent the deletion of important items by accident? We currently have no rundown manager, so a lot of our animating lower-thirds ...

Rundown Manager Recommendations

Posted By Ryan Edwards 03-22-2018 21:35
Found In Egroup: Graphics \ view thread
Currently, we are running XPression with no rundown manager. As you could imagine it's a tedious process, however we plan on upgrading to a full rundown manager in the near future. In the past I have personally used iNews, and thought it performed very well. I'm wondering if there are any other recommendations ...

RE: Media Manager issue

Posted By Ryan Edwards 03-12-2018 23:34
Found In Egroup: Production Switchers \ view thread
Is there a way to actually see the Cache in the Carbonite Black, similar to the vision switcher. Where you can go to the still store, and click to see the items currently store in the Cache. I don't cant find a similar path on the Carbonite Black. #Carbonite

Change bank names on a Carbonite

Posted By Ryan Edwards 03-09-2018 21:57
Found In Egroup: Production Switchers \ view thread
Is there a way to change bank names on a Carbonite? Thanks

RE: Limit to how many Chroma Keys across multiple MLEs

Posted By Ryan Edwards 01-19-2018 19:43
Found In Egroup: Production Switchers \ view thread
Yes, I believe that would be a solution. Thank you for your response. #Carbonite

RE: Limit to how many Chroma Keys across multiple MLEs

Posted By Ryan Edwards 01-10-2018 20:29
Found In Egroup: Production Switchers \ view thread
Never mind, I just read in the manual there are 2 Chromas shared throughout the switcher. My bad for posting #Carbonite

Limit to how many Chroma Keys across multiple MLEs

Posted By Ryan Edwards 01-10-2018 19:54
Found In Egroup: Production Switchers \ view thread
I was trying to do three Chroma Key effects spread across one MLE, and 2 other MiniMEs. MLE 1 - Standard 2-Box with the graphic used for the box pulled from MS2, with Chroma applied to keyer 3. Keyer 1 and keyer 2 contain my camera sources, with DVE applied to both. MiniME1 - Standard Green ...

RE: Trying to establish connection between Carbonite and ProVideoServer

Posted By Ryan Edwards 12-29-2017 19:54
Found In Egroup: Production Switchers \ view thread
Just to follow up, PVS said that my best bet would be to set up 4 separate AMP devices as connections. This would not work, as I would need 3 additional user ports (in addition to 3811), but Carbonite will not allow me to create additional user ports. Again, ProVideoServer apparently doesn't not have ...

RE: Trying to establish connection between Carbonite and ProVideoServer

Posted By Ryan Edwards 12-23-2017 00:05
Found In Egroup: Production Switchers \ view thread
Thanks, I'll relay this information to the support at PVS. #Carbonite