Profile

Marc Faßbender

Contact Details

My Content

1 to 20 of 29 total

RE: V12 Tip: Dip to Black (Preset Black) transition and changes to Fade to Black functionality

Posted By Marc Faßbender 07-19-2016 13:00
Found In Egroup: Production Switchers \ view thread
It's strange because going back to diss from flash works with a double press of the diss button. #Carbonite

RE: Media Wipe is under keyers

Posted By Marc Faßbender 07-14-2016 09:52
Found In Egroup: Production Switchers \ view thread
Hiho, after another show I'd like to give you a feedback from production side: There's almost no situation, where you would want any keyer to be on top of the media wipe. In my opinion the media wipe should be the top layer by default. Others seem to have the same issue: http:// ...

Triggering CCs by keyboard

Posted By Marc Faßbender 01-11-2016 12:42
Found In Egroup: Production Switchers \ view thread
Hiho everybody, is it possible to trigger CCs by keyboard? Like for example assigning the shotbox items in dashboard a keyboard button? Or even better, triggering them by a xkeys keypad ( http://xkeys.com/xkeys/xk24.php )? Regards, Marc

RE: Copying Custom Controls

Posted By Marc Faßbender 09-29-2015 14:10
Found In Egroup: Production Switchers \ view thread
I wanted to say that I'd still like the function to copy single CCs from other sets into the current set within Dashboard only. #Carbonite

RE: Bug report: Custom Control Editor

Posted By Marc Faßbender 09-25-2015 15:38
Found In Egroup: Production Switchers \ view thread
I see. Probably the best solution would be to do a prompt, before changes are lost. Just a standard one with maybe 'save and continue', 'continue without saving' and 'cancel' options. #Carbonite

RE: Bug report: Custom Control Editor

Posted By Marc Faßbender 09-22-2015 12:45
Found In Egroup: Production Switchers \ view thread
I'm only referring to the new CC Editor introduced in Dashboard 7. Maybe that wasn't clear enough. That's the reason why you couldn't properly understand these bugs. #Carbonite

RE: Bug report: Custom Control Editor

Posted By Marc Faßbender 09-22-2015 09:25
Found In Egroup: Production Switchers \ view thread
??? Are you also talking about the new CC Editor introduced with the 11.0 Firmware and Dashboard 7? #Carbonite

Bug report: Custom Control Editor

Posted By Marc Faßbender 09-17-2015 10:26
Found In Egroup: Production Switchers \ view thread
Hiho, I found 2 bugs that I'd like to share with you. 1. When you edit a CC and you forget to click on "stop recording" and then for example select another CC for editing, then all the changes are lost. I think selecting another CC should save everything and stop the recording. 2. ...

Frame-Stores handling loss of signal

Posted By Marc Faßbender 08-21-2015 08:39
Found In Egroup: Production Switchers \ view thread
Hiho Is there a way to change the behavior of the Frame-Stores on a loss of signal? Currently the signal will just freeze which often means you barely notice the loss of signal. I would actually prefer it to go black or something. Greetings, Marc

Storing Aux and Key delegations

Posted By Marc Faßbender 08-21-2015 08:26
Found In Egroup: Production Switchers \ view thread
Hiho again :) For some reasons it seems like the Aux delegation as well as the key delegation is not stored within the switchers save files. Also rebooting the switcher (which is sometimes forced by an IP change for example) will reset all delegations back to the default black. Am ...

RE: PV monitor follow ME selection?

Posted By Marc Faßbender 06-12-2015 08:39
Found In Egroup: Production Switchers \ view thread
Yup, indeed I could use a third monitor, but I only have two available. Thus I want to use the main PV monitor for that purpose. However I didn't even have the idea of selecting ME1 preview on the main PV bus. Actually I should really try it. It sounds like the best possible solution. Thanks for ...

RE: PV monitor follow ME selection?

Posted By Marc Faßbender 05-12-2015 12:57
Found In Egroup: Production Switchers \ view thread
Ok, but that means I need to press at least two buttons in every case (one for ME selection and another one for switching the monitor input). #Carbonite

PV monitor follow ME selection?

Posted By Marc Faßbender 05-07-2015 13:13
Found In Egroup: Production Switchers \ view thread
Hello, we have a 2 ME Carbonite but only a 1 ME panel. Is it possible to make the PV output of the Carbonite follow the ME selection on the panel? This would be especially useful when re-entering ME 1 into ME 2. Then I would be able to use my main PV and PGM monitor while mixing on ME 1. ...

RE: Disabling GPI

Posted By Marc Faßbender 04-07-2015 09:08
Found In Egroup: Production Switchers \ view thread
Hiho Brandon, I just tried out your awesome idea. It works perfectly, just like intended :-) Thanks a lot Brandon. I will probably use it in the future. The only little downside is, you need to make sure, the macro keeps running and isn't stopped, but that should be possible. ...

RE: State / Memory Attributes

Posted By Marc Faßbender 04-02-2015 12:34
Found In Egroup: Production Switchers \ view thread
Okay, thank you. Please leave a reply here when the bug has been fixed. #Carbonite

RE: Substitution Table

Posted By Marc Faßbender 04-01-2015 15:29
Found In Egroup: Production Switchers \ view thread
Okay, glad to hear this feature is coming later :) #Carbonite

Substitution Table

Posted By Marc Faßbender 04-01-2015 15:04
Found In Egroup: Production Switchers \ view thread
Hiho, I've figuered out there's a subsitution table available in the mixer. However it seems like it's only working in conjunction with MiniMEs and Multiscreens. Is it possible to configure something like: If you select source 1 on ME 2, then automatically select source 2 on MiniME 1 for ...

RE: Key PV button

Posted By Marc Faßbender 04-01-2015 13:53
Found In Egroup: Production Switchers \ view thread
Yeah, but you're still unable to show the alpha of a self-, chroma-, or DVE-key for example (as far as I know). The Key PV is indeed not that important, but it's nice for more comfortable and quicker control. #Carbonite

RE: Disabling GPI

Posted By Marc Faßbender 04-01-2015 13:35
Found In Egroup: Production Switchers \ view thread
Well the 2 GPIs are coming from 2 simple physical buttons, that are operated by one of the hosts during some parts of the show. Can't make it more reliable, if that was your intention. #Carbonite

RE: State / Memory Attributes

Posted By Marc Faßbender 04-01-2015 13:28
Found In Egroup: Production Switchers \ view thread
Exactly, I agree. However I greyed out all MLE 1 keyer parameters in Live Assist "“ Memory "“ Store before storing that state. That's why I'm wondering... #Carbonite