Profile

Heinrich Helmbold

Contact Details

My Content

1 to 10 of 10 total

RE: Custom Panel Transitions / Cuts on outputs

Posted By Heinrich Helmbold 11-20-2017 19:39
Found In Egroup: Facility Control \ view thread
Thanks a lot for the feedback. Yes it is a Carbonite and we do have mini ME's available for this. I will start the discovery process on how to do this :-) Still very new at the whole thing, but making progress. #DashBoard

Custom Panel Transitions / Cuts on outputs

Posted By Heinrich Helmbold 11-20-2017 13:36
Found In Egroup: Facility Control \ view thread
I assume transitions can only be made from PV to PGM? Is there any way of transitioning (fading) between sources to an output? For example - I have CLN on Output 5. I would like to change that from CLN to Camera 1 (Input 1) but preferrably have it fade instead of cut. And then fade back to CLN

RE: Viewcontrol on second display

Posted By Heinrich Helmbold 11-14-2017 18:56
Found In Egroup: Production Switchers \ view thread
Thanks again! It doesn't specify what resolutions it supports, only says 1920x1080 full HD. Does this mean it supports 1080i? #Carbonite

RE: Viewcontrol on second display

Posted By Heinrich Helmbold 11-14-2017 04:11
Found In Egroup: Production Switchers \ view thread
The Dell screen we using seem to only support 1080p. What model of the planar screen are you using? #Carbonite

RE: Creating a custom panel from Solo softpanel

Posted By Heinrich Helmbold 11-14-2017 04:07
Found In Egroup: Facility Control \ view thread
Thanks... I am still tinkering through Custom Panel builder. Just looks so much easier on the YouTube videos LOL. Nothing behaves as it should and the lack of horisontal scrollbars makes it impossible for me to drag the controls I need from Viewcontrol. #DashBoard

Creating a custom panel from Solo softpanel

Posted By Heinrich Helmbold 11-08-2017 19:16
Found In Egroup: Facility Control \ view thread
We are running a Carbonite Solo panel with the MM frame. Looking at this video : https://youtu.be/dHyrDi9fVcE there is a softpanel of the Solo panel, and I guess this is with the all-in-one Carbonite Black Solo. Is it possible to get that softpanel on our setup in order to make a custom panel? And if ...

RE: Should we power off?

Posted By Heinrich Helmbold 11-02-2017 19:22
Found In Egroup: Production Switchers \ view thread
Thank you very much for your input and I think I got exactly what I needed to hear. I come from a PC background, my PC is on 24/7 and if it wasn't for that MS company that forces restarts, my PC would be on year in and out. The Carbonite is built to high standards, so it should be fine then to leave ...

Should we power off?

Posted By Heinrich Helmbold 11-02-2017 06:41
Found In Egroup: Production Switchers \ view thread
We run a Carbonite MM at our house of worship which is mainly on Sundays and then 2 or 3 times during the week. Should we keep the frame running 24/7 or switch it off when not in use? The biggest issue is that the PCs connected to it loses its second monitor feed if the Carbonite isn't switched on, ...

RE: Viewcontrol on second display

Posted By Heinrich Helmbold 11-01-2017 14:23
Found In Egroup: Production Switchers \ view thread
Thanks a lot Les. I will have a look for the settings. The interference is like the frame sync is out. Just like when you select a refresh rate in Windows that is not fully supported by the monitor... Everything shakes :-) Was just curious if anyone had any luck with other products and converters ...

RE: Viewcontrol on second display

Posted By Heinrich Helmbold 10-29-2017 16:04
Found In Egroup: Production Switchers \ view thread
Having ViewControl on the second screen is great, but I can't get the touch to work on the 2nd display? When touching the screen, it reflects on the main monitor. I am sure there has to be a way this can be fixed in Windows, has anyone else had this issue? Also... what SDI - HDMI converters can ...