Profile

Dixon Styres

Contact Details

My Content

1 to 19 of 19 total

RE: If Datalinq returns empty on null then set text to 0

Posted By Dixon Styres 03-06-2018 17:39
Found In Egroup: Graphics \ view thread
You can use something like this. if text = Nothing then text = "0" End If #XPression

RE: Setting Scene Key Scripting

Posted By Dixon Styres 02-28-2018 04:42
Found In Egroup: Graphics \ view thread
Ok, I changed two of your OnSetText lines to scene.GetDatalinqKeys(keys) scene.RefreshDatalinqs This updates the datalinq key, however it seems I have to set the text twice before my key updates. Almost like the script needs to be run twice before the key will update. Any ideas? #X ...

RE: Setting Scene Key Scripting

Posted By Dixon Styres 02-27-2018 02:26
Found In Egroup: Graphics \ view thread
Thanks Garner, I implemented that and it works perfectly in my OnOnline, however the key does not appear to update when I put the script in my Onsettext. Is there a command to refresh the scene without taking it offline? #XPression

Setting Scene Key Scripting

Posted By Dixon Styres 02-23-2018 14:56
Found In Egroup: Graphics \ view thread
I'm looking to set one of my global scene keys to the value of a datalinq variable. What would be he way i go about this. I have a global key %jersey% and would like it to source from a datelinq source.

RE: Clip Time Remaining

Posted By Dixon Styres 02-23-2018 01:09
Found In Egroup: Facility Control \ view thread
Got it, thanks. #DashBoard

Clip Time Remaining

Posted By Dixon Styres 02-22-2018 18:43
Found In Egroup: Facility Control \ view thread
I've made some buttons in dashboard to control the clip store on my Graphite. Is there a way to have Dashboard display the time remaining on a clip?

RE: Datalinq Error

Posted By Dixon Styres 02-21-2018 20:15
Found In Egroup: Graphics \ view thread
I had this issue and called ross earlier today. They were able to team view in, and fix the problem by downloading a file. https://www.microsoft.com/en-us/download/details.aspx?id=13255 I needed the 32bit but it may vary for you. #XPression

RE: VDCP Control

Posted By Dixon Styres 02-20-2018 20:38
Found In Egroup: Production Switchers \ view thread
Okay, i switched my commands over to the SEQ and have it working now. Thanks #Graphite #Graphite #Graphite #Graphite

RE: VDCP Control

Posted By Dixon Styres 02-20-2018 18:49
Found In Egroup: Production Switchers \ view thread
Also, am i going about this the right way? When i used RossTalk to play videos through Xpression they would only play in the frame buffer where as i needed them to play on my server channels. #Graphite #Graphite #Graphite #Graphite

RE: VDCP Control

Posted By Dixon Styres 02-20-2018 18:34
Found In Egroup: Production Switchers \ view thread
Also, when you say Windows system, Should i be directing to my public IP address, or the one of the graphite (192.168.0.113)? #Graphite #Graphite #Graphite #Graphite

RE: VDCP Control

Posted By Dixon Styres 02-20-2018 18:30
Found In Egroup: Production Switchers \ view thread
https://www.rossvideo.com/control-systems/dashboard/dashboard-u/video-tutorial-108/ #Graphite #Graphite #Graphite #Graphite

RE: VDCP Control

Posted By Dixon Styres 02-20-2018 18:04
Found In Egroup: Production Switchers \ view thread
Trying to control it from Dashboard. I loaded in the example VDCP panel and looked like i was unable to connect. I'm using Dasboard on another computer though so that may be the issue. I'll try to integrate it into my created buttons and see. #Graphite #Graphite #Graphite #Graphite

VDCP Control

Posted By Dixon Styres 02-20-2018 16:55
Found In Egroup: Production Switchers \ view thread
I've been looking to play videos on my graphite server channels via VDCP control. What will the ip/port settings be to interface?

RE: XPression Control From Parameter.

Posted By Dixon Styres 02-01-2018 17:37
Found In Egroup: Facility Control \ view thread
Thanks, that worked perfectly. #DashBoard

XPression Control From Parameter.

Posted By Dixon Styres 01-31-2018 23:42
Found In Egroup: Facility Control \ view thread
Hello, I have an integer parameter and a button that brings a TakeID Online in Expression. What i would like to do is have the integer parameter set this TakeID, and am wondering how to accomplish this.

RE: Vision And Dashboard

Posted By Dixon Styres 09-01-2016 20:45
Found In Egroup: Production Switchers \ view thread
Awesome, I'll try it out, thanks. #Vision

RE: Dashboard Button Transfer

Posted By Dixon Styres 09-01-2016 14:08
Found In Egroup: Facility Control \ view thread
Sounds good, so the computer with dashboard needs to remain connected to the system when i want to use the button? Also how does the switcher need to be setup to interact with the id for the button. #DashBoard

Dashboard Button Transfer

Posted By Dixon Styres 09-01-2016 04:06
Found In Egroup: Facility Control \ view thread
Hello, wondering if anyone had any information on transferring a created Dashboard button to the switcher. We have installed some networked lights which can be triggered with a UDP string sent over network. I've created a button that will send UDP strings in Dashboard, but am wondering if i can ...

Vision And Dashboard

Posted By Dixon Styres 09-01-2016 03:56
Found In Egroup: Production Switchers \ view thread
Hello, wondering if anyone had any information on transferring a created Dashboard button to the switcher. We have installed some networked lights which can be triggered with a UDP string sent over network. I've created a button that will send UDP strings in Dashboard, but am wondering if i can ...