Profile

Jack Davis

Contact Details

My Content

1 to 19 of 19 total

Video Server Cue Times

Posted By Jack Davis 11-23-2018 13:56
Found In Egroup: Production Switchers \ view thread
Last week we moved to Omneon video servers. We had NEXIO video servers before that. I have noticed that the cue time for these video servers are longer. I have contacted Harmonic about it and they said its up to the device cuing the video. Is there a setting in the Vision switcher that I can change to ...

RE: Audio Fading from Video templates

Posted By Jack Davis 08-09-2018 18:36
Found In Egroup: Production Workflow \ view thread
Could I write a relative custom control that would delay cuing up the next video so I can fade the server channel audio down? #OverDrive

Audio Fading from Video templates

Posted By Jack Davis 08-09-2018 13:59
Found In Egroup: Production Workflow \ view thread
Is there away to do a audio fade from a video clip from the video server that has music in it when transitioning to the next template before it cues up the next video?

Loading Disk Set Wipes Vision's Sequences

Posted By Jack Davis 03-02-2016 15:17
Found In Egroup: Production Switchers \ view thread
Over the summer our station got an upgrade to Vision software version 17.3 where we were at version 14.1 before. Ever since that upgrade whenever I load a current disk set none of the sequences load so I have to load an older sequence from a past disk set to get them back. Any ideas how I can get the ...

RE: Keyframe move in Vision

Posted By Jack Davis 02-18-2016 16:21
Found In Egroup: Production Switchers \ view thread
Thanks for your help! I got it worked out. #Vision

Keyframe move in Vision

Posted By Jack Davis 02-16-2016 20:27
Found In Egroup: Production Switchers \ view thread
I want to take a camera shot full screen then on command like a custom control make a DVE transition and have the camera shot be sized down into a webpage. I know how to size the camera shot but I don't know how to have it transition with a custom control. Any help would be great.

Could not perform transition because

Posted By Jack Davis 08-10-2015 21:03
Found In Egroup: Production Workflow \ view thread
Last week we got upgraded to Vision Switcher 17.3h and Overdrive 12.0.13. Now if we double tap to fast (as fast as we did before the upgrade) into double graphics and a shot we get the following error "Could not perform transition because Device Transitions may only be used when a MOS Device ...

Video Server Realtive Custom Control

Posted By Jack Davis 02-19-2015 13:30
Found In Egroup: Production Switchers \ view thread
I want to build a realtive custom Control that would pause the playout server that will be going out on air. Is that possible.

triple box in Overdrive

Posted By Jack Davis 11-13-2013 18:21
Found In Egroup: Production Workflow \ view thread
How would one do a triple with Over Drive? I tried setting up a switcher memory for the first two boxes then I was going to just use my third dsk but when I have the dsk set to a dve it gives me a "All the Warp Resources are currently in use. Cannot allocate: MEL2 Trans. Current S&T Warp Resource ...

Vision reference

Posted By Jack Davis 04-22-2013 15:22
Found In Egroup: Production Switchers \ view thread
Is there anyway to adjust the the H and V phases in the output of the Vision switch? I am running Vision software 12.1a

Overdrive and Vision System Restart

Posted By Jack Davis 08-21-2012 14:12
Found In Egroup: Production Workflow \ view thread
How often should the Overdirve server, Vision switcher, and Vision Frame be restarted? Should all these items be restarted or shutdown all the way?

RE: Crossover Mask Key

Posted By Jack Davis 08-17-2012 17:51
Found In Egroup: Production Switchers \ view thread
Yes that was the issue the joy stick needed calibrating. Thanks for your help #Carbonite

Crossover Mask Key

Posted By Jack Davis 08-17-2012 15:51
Found In Egroup: Production Switchers \ view thread
I am using a mask key in Keyer 2 and the mask will not stay when the Key is selected. I can watch the percentages changing when it is selected and on air the mask keeps on getting smaller and smaller. Is this an user, hardware, or a software issue?

RE: Double Box to Chrome Effect

Posted By Jack Davis 06-21-2012 19:59
Found In Egroup: Production Switchers \ view thread
That worked Thanks #Vision

RE: Double Box to Chrome Effect

Posted By Jack Davis 06-21-2012 19:33
Found In Egroup: Production Switchers \ view thread
When I get to Key 3 and try to select that MLE bus' clean feed I get the error "You cannot select xpt as it would create a feedback loop" Is there away around this? #Vision

Double Box to Chrome Effect

Posted By Jack Davis 06-21-2012 17:59
Found In Egroup: Production Switchers \ view thread
Is it possible to make an Overdrive template that will allow a double box to a chrome key effect in one side of the box and a camera shot on the other? We would like to double box to our weather wall. We have a Vision 3 MLEs Vision 12.1a, and Overdrive 9.3

Nexio Looping Relative Custom Control

Posted By Jack Davis 06-21-2012 15:19
Found In Egroup: Production Switchers \ view thread
I was trying to make a Relative Custom Control with our Vision switcher version 12.1a, so that I could loop video on the air, which would then auto run in an Overdirve template. When I punch up the Nexio in the Program row, click more, and then click Loop, it turns on and then a half a second later it ...

RE: Aux Send Cuing up During Prepared Event

Posted By Jack Davis 06-21-2012 13:00
Found In Egroup: Production Workflow \ view thread
Thanks and yes you where our trainer. #OverDrive

Aux Send Cuing up During Prepared Event

Posted By Jack Davis 06-20-2012 20:43
Found In Egroup: Production Workflow \ view thread
I am running Vision 12.1a and Overdrive version 9.3.0. I followed the instruction which I have pasted below to put video in my aux send 1:1. The issue I am having, is that when the template in Overdrive is prepared it cues up the aux1:1 before it goes on air. How can I get the template to only change ...