Profile

Ryan Edwards

Contact Details

My Content

1 to 16 of 16 total

Media Storage Audio Output

Posted By Ryan Edwards 11-30-2021 17:54
Found In Egroup: Production Switchers \ view thread
I'm seeking a bit more clarification on the setup regarding outputting .WAV files through media storage on the Carbonite Black. I'm currently trying to setup playing small music files via Custom Controls. The actual patching requires going from the multi viewer output on the Carbonite frame ...

RE: MiniME1 and its DVE Keyer

Posted By Ryan Edwards 02-12-2021 17:32
Found In Egroup: Production Switchers \ view thread
Just for more clarification, resetting key 1 on a Mini ME, it doesn't take off the application of a DVE to that specific keyer. It does however restore the parameters of the applied DVE. Is there a way to simply turn off the DVE that is being applied to key 1 of a Mini, without resetting the Mini? ...

RE: Adding delay to video source

Posted By Ryan Edwards 12-22-2020 23:50
Found In Egroup: Production Switchers \ view thread
Great, thank you so much Les. #Carbonite

RE: Adding delay to video source

Posted By Ryan Edwards 12-22-2020 23:37
Found In Egroup: Production Switchers \ view thread
Just for more clarification, once I turn on the frame synch is there just an option listed as delay and frames chosen? We purchased this switcher earlier this year, so I assume that recent enough to have the delay feature. #Carbonite

RE: Adding delay to video source

Posted By Ryan Edwards 12-22-2020 23:17
Found In Egroup: Production Switchers \ view thread
You’re referring the the multiprocessor input board, as a option for purchase on the Carbonite Ultra? #Carbonite

Adding delay to video source

Posted By Ryan Edwards 12-22-2020 17:39
Found In Egroup: Production Switchers \ view thread
Is there a way to add delay to a video source that can be customized on the Carbonite Black. The multiprocessor input board I believe is only an option on the Acuity, but I was wondering if customized delay can be replicated solely through the Carbonite black. Frame synchs and DVE keys add a 1 ...

RE: Allotted DVE's, and ME Recall Mode

Posted By Ryan Edwards 07-28-2020 17:50
Found In Egroup: Production Switchers \ view thread
So in my multiscreen, it says no DVE is applied, am I pulling those DVE's using another function #Carbonite

Allotted DVE's, and ME Recall Mode

Posted By Ryan Edwards 07-28-2020 17:00
Found In Egroup: Production Switchers \ view thread
What does a MiniME Background in the allotted DVE's status refer too. I thought allotted DVE's were simply applying that resource to an individual keyer. I thought this might refer to Multiscreen functionality, but in Configuration my multiscreens don't seem to have a DVE applied to them. ...

RE: Abekas Mira 8 Channel across multiple control rooms

Posted By Ryan Edwards 07-18-2020 02:10
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Thank you for your response. #Mira

RE: Mira playing transitions a couple frames to high

Posted By Ryan Edwards 07-18-2020 02:09
Found In Egroup: Production Switchers \ view thread
I called supports, it was an issue with frame synch. I added Mira to the Carbonite Frame synchs, and that fixed the issue. Thanks Les #Carbonite

Mira playing transitions a couple frames to high

Posted By Ryan Edwards 07-17-2020 16:59
Found In Egroup: Production Switchers \ view thread
We are building out transitions on an 8 channel Mira, for a Carbonite black. Currently the transitions play out a few pixels high, revealing the source switching underneath. Is there a setting in Mira to adjust output Y axis, or does the Carbonite have a setting to accomplish correct output playout

RE: Panel ME reset

Posted By Ryan Edwards 07-16-2020 19:31
Found In Egroup: Production Switchers \ view thread
ok got it, thanks #Carbonite

RE: Panel ME reset

Posted By Ryan Edwards 07-16-2020 19:13
Found In Egroup: Production Switchers \ view thread
You're right, it stays the same. Can i change a setting to make it go to all black like before? #Carbonite

RE: Panel ME reset

Posted By Ryan Edwards 07-16-2020 18:58
Found In Egroup: Production Switchers \ view thread
On the Ross Carbonite with the effects memory keypad, is there any reason why when holding down store and recall at the same time the ME wouldn't reset? I'm trying to clear the keyers, and where I hold down the store and recall of the corresponding ME, nothing happens. I also held down the reset ME on ...

Abekas Mira 8 Channel across multiple control rooms

Posted By Ryan Edwards 07-15-2020 00:36
Found In Egroup: Video Servers & Replay Systems​ \ view thread
We are building out a new Ross Carbonite control room that would compliment our other main control room. In the main Control Room we use a Sony 8000, with all of our transitions stored on an Abekas Mira connected via VDCP. Would there be any scenario of conflict if we shared that same Mira with ...

Replicating Rosstalk with Chyron

Posted By Ryan Edwards 08-24-2018 00:01
Found In Egroup: Production Switchers \ view thread
I'm the past I have used Carbonite with XPression, and the RossTalk feature is great as a one-man-band running a graphics list. Now my graphics machine is Lyric, does Carbonite communicate in anyway with Chyron Lyric, that in anyway is similar to Rosstalk. Simple commands like take, take next, cue up ...