Profile

Marsha Opacic

Contact Details

My Content

1 to 19 of 19 total

RE: MIRA Codec

Posted By Marsha Opacic 10-29-2024 10:36
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Brad, you can make a preset in Adobe for the AVC-Intra Op1a mxf in 1080i/59.94 but you still must run it through the Mira Export app to rewrap it to the .clip so it is seen by the Mira (in the H:Video folder). It will import instantaneous if made as the Op1a mxf. ------------------------------ ...

RE: Update from Mira+ 9.0.1 to 9.3.1 doesn't work

Posted By Marsha Opacic 09-20-2024 10:37
Found In Egroup: Video Servers & Replay Systems​ \ view thread
If you are using the correct download software, I'm not sure. You can reach out to techsupport@rossvideo.com and they can login and check it out. ------------------------------ Marsha Opacic Manager, Training Solutions - Sports & Graphics Ross Video United States -------------------------- ...

RE: Update from Mira+ 9.0.1 to 9.3.1 doesn't work

Posted By Marsha Opacic 09-19-2024 15:57
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Joern, there's a difference between Mira and Mira+ software. Mira software cannot be put on a Mira+. You need to download and install Mira+ software. https://www.rossvideo.com/support/software-downloads/mira-plus-software-downloads/ ------------------------------ Marsha Opacic Manager, Training ...

RE: Mira & Tria

Posted By Marsha Opacic 01-25-2022 12:32
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Brad, I should also mention 2 control panels work with Mira+, not Mira Express. ------------------------------ Marsha Opacic Ross Video ------------------------------

RE: Mira & Tria

Posted By Marsha Opacic 01-25-2022 12:24
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Brad, You can use the Mira for replay and clip playback, especially if you have 2 control panels, making them separate so 1 person could do replay and the other do clip playback. Also, the Mira is very user-friendly and straightforward, making it pretty easy to learn. Hope this helps! ------- ...

RE: Duet Express send mark cue point in Dashboard

Posted By Marsha Opacic 10-18-2021 11:25
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Chuck, I tried to reply but not sure if it sent. You can mark cue points using the Abekas OGP gateway on DashBoard, not RossTalk. Attached is a the Quick Start Guide. There are tons of commands and parameters, and even a palette to create your own panel. Hope this helps. Thank you. - ...

RE: Duet Express send mark cue point in Dashboard

Posted By Marsha Opacic 10-18-2021 11:24
Found In Library: Video Servers & Replay Systems​

RE: Still image import

Posted By Marsha Opacic 08-31-2021 19:59
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Vincent, Could you please email abekastechsupport@rossvideo.com and cc me at mopacic@rossvideo.com with examples of the stills you are importing and won't play? We have tried it here and all is importing and playing out correctly. Thanks. ​ ------------------------------ Marsha Opacic Ross ...

RE: TRIA Control From Dashbaord - Playlists

Posted By Marsha Opacic 08-20-2021 14:55
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Quintin, This may be a bug and we might have to get Tech Support involved. Do me a favor and email me personally so I can introduce you to the right person. mopacic@rossvideo.com ------------------------------ Marsha Opacic Ross Video ------------------------------

RE: TRIA Control From Dashbaord - Playlists

Posted By Marsha Opacic 08-20-2021 14:09
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Quintin, 1. Is the clip you are trying to play part of the playlist? 2. Or are you trying to load a separate clip when a playlist is already loaded into that channel? 3. Did you try ejecting the channel first before loading and playing the clip? 4. What kind of switcher do you have and ...

RE: MIRA and Dashboard

Posted By Marsha Opacic 06-29-2021 12:06
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Bruna, Playlists cannot be seen in DashBoard. However, there is a way to build a playlist within DashBoard since DashBoard can see the clips within the Clip Library. Unfortunately, I'm not a DB expert, but if you want to email me directly, I may be able to point you in the right direction for help. ...

RE: MIRA and Dashboard

Posted By Marsha Opacic 06-28-2021 15:59
Found In Library: Video Servers & Replay Systems​

RE: MIRA and Dashboard

Posted By Marsha Opacic 06-28-2021 15:59
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hello, Attached is a quick start guide for the Abekas OGP service and DashBoard setup. Hope this helps. ------------------------------ Marsha Opacic Ross Video ------------------------------

RE: MIRA Codec

Posted By Marsha Opacic 04-12-2021 08:59
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Brett, sounds like you have QT turned on in the Import application. Open the Import application, go to Edit, Configure. Import Codec tab, change to FFmpeg, click OK and then try to reimport. You should not see watermarks anymore. ------------------------------ Marsha Opacic Ross Video ----- ...

RE: Mira CAD File

Posted By Marsha Opacic 09-03-2020 15:13
Found In Egroup: Video Servers & Replay Systems​ \ view thread
We do not have a CAD file for the Mira Control Panel, but here is an illustration of Mira Express CP. Hope this helps. #Mira

RE: Tria Watch Folder - Sync by Date Force Overwrite

Posted By Marsha Opacic 08-25-2020 13:24
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Jason, clip names should overwrite no matter the date. It shouldn't matter importing via Watch Folder or not. Make sure your Tria Express or Tria+ is updated to latest version, software downloads are free on rossvideo.com, but important note if your Tria is older and not on Windows 10, it needs to ...

RE: Abekas Mira 8 Channel across multiple control rooms

Posted By Marsha Opacic 07-18-2020 02:19
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Ryan! I literally just confirmed with the source that you should be able to set different room configurations to different protocols. On the RS422 tab in Mira Config. #Mira

RE: Abekas Mira 8 Channel across multiple control rooms

Posted By Marsha Opacic 07-17-2020 18:42
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Ryan, I will answer your questions to the best of my knowledge. 1. You cannot split protocols. If you're using VDCP for Sony, you cannot do AMP as well for Carbonite, or vice versa, unfortunately. 2. I am not sure about Carbonite supporting setting TC cues. Usually a Carbonite integrated with a Mira ...

RE: MIRA Codec

Posted By Marsha Opacic 03-25-2020 16:58
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Fastest import is native codec. Ex.: AVC-Intra Mira running 1080i, native codec and format would be an AVC-Intra 100 Op1a mxf 1080i 59.94 #Mira