Profile

Jason Osborne

Contact Details

My Content

1 to 20 of 28 total

RE: Carbonite Ultra - LTC connector

Posted By Jason Osborne 08-21-2025 13:12
Found In Egroup: Production Switchers \ view thread
Good to know, thank you for following up Simon. I had used an XLR cable. ------------------------------ Jason Osborne ------------------------------

RE: Carbonite Ultra - LTC connector

Posted By Jason Osborne 08-20-2025 16:40
Found In Egroup: Production Switchers \ view thread
Sorry I can't remember exactly what worked - but I think ground went to one of the negatives. ------------------------------ Jason Osborne ------------------------------

RE: Carbonite Ultra - LTC connector

Posted By Jason Osborne 02-14-2024 23:57
Found In Egroup: Production Switchers \ view thread
Thank you Les - will try this ------------------------------ Jason Osborne ------------------------------

Carbonite Ultra - LTC connector

Posted By Jason Osborne 02-14-2024 21:44
Found In Egroup: Production Switchers \ view thread
Trying to figure out how to wire XLR pinout to Weco connector for LTC input on Carbonite Ultra. The manual shows the 3 connectors on the Weco as LTC-, LTC+, LTC-. How does that translate to the XLR cable pinout? Thanks. ------------------------------ Jason Osborne CBS INTERACTIVE ---------------- ...

CB2S-PANEL running CCs

Posted By Jason Osborne 10-08-2021 13:04
Found In Egroup: Production Switchers \ view thread
On the CB2S Panel - I thought it was possible to see names of CCs and run them from the module in the top left corner, highlighted in photo below. Is that not possible? ------------------------------ Jason Osborne CBS INTERACTIVE ------------------------------

RE: Panel ME reset

Posted By Jason Osborne 11-16-2019 04:28
Found In Egroup: Production Switchers \ view thread
Thanks Les. Our panel doesn't have Memory Keypad, you think making a custom control to recall a blank/basic memory would be best to achieve this then? #Carbonite

Panel ME reset

Posted By Jason Osborne 11-15-2019 20:13
Found In Egroup: Production Switchers \ view thread
When I used to use a Vision, I would often use a 2-key press on the panel (recall and store??) to reset an ME. Is there a shortcut like this on Carbonite Panels?

RE: Switcher Frame loses NIC

Posted By Jason Osborne 11-13-2019 21:47
Found In Egroup: Production Switchers \ view thread
Thank you! #Graphite #Graphite #Graphite #Graphite

RE: Switcher Frame loses NIC

Posted By Jason Osborne 11-12-2019 20:37
Found In Egroup: Production Switchers \ view thread
Thanks Aaron, great points I didn't try to ping it since the amber light on NIC wasn't blinking, I assumed I couldn't ping it. Theory of another device having same IP makes since. Any ideas on how to determine? Recommend changing the static IP on Carbonite card? #Graphite ...

Switcher Frame loses NIC

Posted By Jason Osborne 11-11-2019 19:54
Found In Egroup: Production Switchers \ view thread
I'm having a reoccurring issue where after Graphite has been running for a couple days and not used, the frame loses its network connection. At this point the NIC on the Carbonite only has green light blinking, not amber, and Dashboard and CB2 panel can't communicate with it. I have default ...

RE: CB2 Panel Custom Controls

Posted By Jason Osborne 11-05-2019 22:27
Found In Egroup: Production Switchers \ view thread
Thanks Les! #Carbonite

RE: CB2 Panel Custom Controls

Posted By Jason Osborne 11-05-2019 02:06
Found In Egroup: Production Switchers \ view thread
Great, thank you Jos! I set up as you explained and I'm now able to see names of CCs when I select a bank via mnemonics being on. One thing though, after I select a bank and want to go back to seeing my ME sources on that row, selecting ME or MiniME buttons do not work, but key select ...

RE: Correct method to pop off panel buttons

Posted By Jason Osborne 11-05-2019 01:07
Found In Egroup: Production Switchers \ view thread
Perfect, thanks Jos! Now, how do User settings get saved? I noticed User is not part of saving a set. Or do you not save these settings? #Carbonite

CB2 Panel Custom Controls

Posted By Jason Osborne 10-17-2019 21:02
Found In Egroup: Production Switchers \ view thread
Is there a way to display the text names of custom controls on the panel? I assumed there would be a way to see the names, but I've only been able to fire CCs by hitting "bank 1-4" then a button on the row above BG bus, which doesn't display any names.

Correct method to pop off panel buttons

Posted By Jason Osborne 10-17-2019 20:59
Found In Egroup: Production Switchers \ view thread
Just got the CB2 panel setup to accompany our Graphite. I would like to change out some buttons (replace aux buttons with mini-me buttons). What's the correct method / tool to pop off buttons?

RE: Multiviewer Green Line

Posted By Jason Osborne 07-17-2019 21:04
Found In Egroup: Production Switchers \ view thread
Thanks Les, Upping those long pauses all the way to 60 frames did the trick : ] #Graphite #Graphite #Graphite #Graphite

RE: Multiviewer Green Line

Posted By Jason Osborne 07-16-2019 16:55
Found In Egroup: Production Switchers \ view thread
Les, I made a CC that changes the layout to single box, changes source to black, then changes layout back, and changes source back. When I run each event in the CC one by one, it corrects the issue. But when I run the CC all at once it does not fix the problem. I have even put pauses ...

RE: Frame Grab

Posted By Jason Osborne 07-10-2019 19:13
Found In Egroup: Graphics \ view thread
I've tried both RGBA 32bit and RGB 24bit and get the same result. Both capture an alpha channel and picture is obscured. #XPression

RE: Frame Grab

Posted By Jason Osborne 07-10-2019 18:14
Found In Egroup: Graphics \ view thread
Any ideas here? #XPression

RE: Multiviewer Green Line

Posted By Jason Osborne 07-10-2019 18:12
Found In Egroup: Production Switchers \ view thread
Thanks Les #Graphite #Graphite #Graphite #Graphite