Profile

RE: Roll Clip to fire Custom Control

Posted By Jason Osborne 03-31-2026 00:48
Found In Egroup: Production Switchers \ view thread

Thank you Les, much appreciated ------------------------------ Jason Osborne LA ------------------------------

RE: Roll Clip to fire Custom Control

Posted By Jason Osborne 03-26-2026 22:14
Found In Egroup: Production Switchers \ view thread

Thanks Les. I see, so to confirm, you are saying that for the Roll Command rather I would want it to be GPI and that will send straight to the custom panel like my custom controls already are doing? And side related question - if I was to choose Custom Cmd for Roll Command and transport was set ...

RE: Roll Clip to fire Custom Control

Posted By Jason Osborne 03-26-2026 19:22
Found In Egroup: Production Switchers \ view thread

Hi Les, For the Roll Command I selected CC and chose the bank / cc number for the custom control. Thanks, ------------------------------ Jason Osborne LA ------------------------------

Roll Clip to fire Custom Control

Posted By Jason Osborne 03-26-2026 16:10
Found In Egroup: Production Switchers \ view thread

Switcher: Carbonite Ultra Solo I have setup a device in Carbonite, that device is a Ross Talk Generic and talks to a Custom Dashboard Panel. That custom panel fires UDP commands to a Mitti video server. I have created custom controls to send Ross Talk GPI commands to the custom dashboard panel to ...

RE: Carbonite Black Custom Control rosstalk udp commands.

Posted By Jason Osborne 04-10-2023 19:54
Found In Egroup: Production Switchers \ view thread

Thank you Les! Got it working. ------------------------------ Jason Blank P+ ------------------------------

RE: Carbonite Black Custom Control rosstalk udp commands.

Posted By Jason Osborne 04-05-2023 15:29
Found In Egroup: Production Switchers \ view thread

Hi Les, Hopping in on this convo - could you expand on "then use RossTalk TCP from the switcher to the DashBoard panel to trigger the events". How would I set up a DB Panel to be a device in Carbonite? Once it's a device, which type of command in CC's would I send to trigger the event on ...

RE: Graphite GPIO

Posted By Jason Osborne 06-28-2022 00:04
Found In Egroup: Production Switchers \ view thread

Thanks Tedd, appreciate it. ------------------------------ Jason Blank P+ ------------------------------

RE: Graphite GPIO

Posted By Jason Osborne 06-21-2022 14:40
Found In Egroup: Production Switchers \ view thread

Ted, the model of Apantac MV is MI-8 12G-UHD Thanks, ------------------------------ Jason Blank P+ ------------------------------

RE: Graphite GPIO

Posted By Jason Osborne 06-17-2022 18:00
Found In Egroup: Production Switchers \ view thread

Hi Ted, thank you. I was wanting to send some GPO commands as Custom Controls to some external devices. One device was an ETC light board, which I'm now seeing I could setup and send UDP commands instead. But the other device is an Apantac Multiviewer, which looks like it would need to be GPO. ...

Graphite GPIO

Posted By Jason Osborne 06-16-2022 21:31
Found In Egroup: Production Switchers \ view thread

I would like to explore using GPIOs sent from our Graphite systems. I see that the Audio Breakout Module is required in order to have the GPIO port. I don't have any other need for the Audio Breakout Module - is it possible to use some kind of USB GPIO Expander in place of this? Would Dashboard / Carbonite ...

Xpression Project formats / Video modes

Posted By Jason Osborne 05-09-2019 02:30
Found In Egroup: Production Switchers \ view thread

I'm a little confused with the editing mode options for a project in Xpression. We normally do productions in either 1080p 29.97 or 1080i 59.94. I was surprised that 1080p 29.97 was not a preset for new projects, but more so that 1080i 59.94 was not an option at all. Why is that? ...

RE: CC group hold

Posted By Jason Osborne 10-04-2017 20:51
Found In Egroup: Production Switchers \ view thread

Thank you Les. #Vision

CC group hold

Posted By Jason Osborne 09-28-2017 19:02
Found In Egroup: Production Switchers \ view thread

I am using a custom control with a group hold on it and am using a separate CC to resume the group hold. I have found if the CC with the hold on it gets ran again (prior to being resumed), that will cause it to be resumed. Is this suppose to happen? Thanks, -Jason

RE: BlackMagic VideoHub control via Dashboard

Posted By Jason Osborne 09-21-2017 02:25
Found In Egroup: Facility Control \ view thread

Hi Joseph, this is great, could you please share the updated panel with me? Thanks, -Jason #DashBoard

RE: OD 15 Shot Summary CC

Posted By Jason Osborne 09-13-2017 18:43
Found In Egroup: Production Workflow \ view thread

Thank you, email sent. #OverDrive

OD 15 Shot Summary CC

Posted By Jason Osborne 09-12-2017 23:09
Found In Egroup: Production Workflow \ view thread

After our group upgraded to OD 15 we started experiencing a problem where after a shot is dragged into a script, the shot summary will no longer see any available custom controls, sometimes transitions also disappear. Attached are two screen grabs, the first showing the shot summary before going ...

Cambot GUI

Posted By Jason Osborne 06-08-2017 22:13
Found In Egroup: Camera Motion Systems \ view thread

We have been frustrated with the "focus" button on the Cambotics GUI. The problem is that the button is located directly next to "replace shot" and our operators go to hit "replace shot" but accidentally hit "focus" and then the camera zooms all the way in on-air. We have no reason to use the focus ...

Jason Osborne

Contact Details

Jason Osborne

My Content

RE: Roll Clip to fire Custom Control

RE: Roll Clip to fire Custom Control

RE: Roll Clip to fire Custom Control

Roll Clip to fire Custom Control

RE: Carbonite Black Custom Control rosstalk udp commands.

RE: Carbonite Black Custom Control rosstalk udp commands.

RE: Graphite GPIO

RE: Graphite GPIO

RE: Graphite GPIO

Graphite GPIO

Xpression Project formats / Video modes

RE: CC group hold

CC group hold

RE: BlackMagic VideoHub control via Dashboard

RE: OD 15 Shot Summary CC

OD 15 Shot Summary CC

Cambot GUI

RE: Overdrive Clip Transition not wokring correctly

RE: Question - Custom Controls

RE: Touchscreen

CONTACT US

COMMUNITY

TERMS & PRIVACY