Profile

Samsung TV Control from Dashboard

Posted By Marty Hill 03-05-2025 14:25
Found In Egroup: Facility Control \ view thread

We have had for years control through Dashboard and ogscript to power on/off and change sources for the number of Panasonic tvs we have around our church campus. We recently got a few more monitors, but these are Samsung. So far, we have been unable to get the control of these through TCP/IP figured ...

Streamdeck Companion from Dashboard

Posted By Marty Hill 02-19-2025 17:22
Found In Egroup: Production Switchers \ view thread

I've been successful in triggering Ross custom controls with no problems. But I have a couple of Streamdeck buttons in Companion doing things that are a lot simpler to program with than in Dashboard. So I am wondering it there is a way to trigger these Streamdeck buttons from Dashboard through Rosstalk. ...

Calling a Custom Control from an ogscript

Posted By Marty Hill 02-26-2024 14:40
Found In Egroup: Facility Control \ view thread

I feel Ive seen this before, and maybe even done it, but I need call a custom control from a conditional ogscript. I feel I am just having some minor brain lock on this, but the command to do this is eluding me, assuming it is actually possible. I have a script that tests for several different ...

RE: Custom Panel to control Ultrix

Posted By Marty Hill 01-30-2024 16:58
Found In Egroup: Facility Control \ view thread

I did this by creating a salvo in the Ultrix and then calling that in a CC. You just need the Salvo ID number which is in parathesis to the right of the Salvo name in the Salvo panel. Here is a pic of the CC. Very simple one line command. I hope this helps. . ------------------------------ ...

Reformatting BM Hyperdeck via Dashboard

Posted By Marty Hill 01-30-2024 10:25
Found In Egroup: Facility Control \ view thread

Need some help here please. We have 9 Hyperdecks which we record 8 camera ISOs and our Program Out of our Carbonite. I've had no problem controlling these with CCs with simple commands such as PLAY, RECORD and STOP. However, to make life a little simpler, I am trying to program a script in ...

MediaManager and OGScript

Posted By Marty Hill 04-06-2023 19:11
Found In Egroup: Graphics \ view thread

To make a long story short, I have an OGscript that has been working flawlessly in moving XPression around automatically after certain graphics have been used to load the next graphic needed. I need to modify this script to do the same thing with MediaManager. In OGscript to utilize this in XPression, ...

Listener and Datalynq Server

Posted By Marty Hill 06-28-2022 13:14
Found In Egroup: Facility Control \ view thread

I have an issue that is probably because I likely do not fully understand all aspects of creating a listener. I have Xpression setup to populate a graphic through Datalynq server, which we have configured to Port 7789, when a message is sent. This part works great. No problem. This message is the ...

RE: Controlling NK Router in Dashboard

Posted By Marty Hill 10-28-2021 14:43
Found In Egroup: Facility Control \ view thread

The findings on that show the first 10 inputs are identical to the Large Switchboard. Is there something I am missing? I need to be able to switch one particular destination from input 8 to 46 and back again when needed. I want to put these changes in two custom controls, but I cannot access Inputs ...

Controlling NK Router in Dashboard

Posted By Marty Hill 10-26-2021 19:17
Found In Egroup: Facility Control \ view thread

I have learned some of the nk.doSwitch command in Dashboard to be able to control my NK Router through scripts in Dashboard. If I want to set Destination 41 to Source 15, everything works beautifully (once I figured the numbering scheme). However, I need to send a source I cannot figure out how ...

RE: how to connect carbonite black plus to control panel 3x

Posted By Marty Hill 04-30-2021 15:25
Found In Egroup: Production Switchers \ view thread

Link seems to be broken. ------------------------------ Marty Hill OAK HILLS CHURCH ------------------------------

RE: Custom panel Macro blink while pause

Posted By Marty Hill 11-04-2020 23:04
Found In Egroup: Production Switchers \ view thread

I have the same question, but mine is with the hold button. It also does not stay a different color displaying its status. It just returns to the original color. Hopefully somebody will answer this. It's been 10 months since you wrote your question. Did you find a solution or does anyone else have one? ...

XPression Desktop Preview

Posted By Marty Hill 11-04-2020 22:31
Found In Egroup: Facility Control \ view thread

Other posts on this have instructions that say to configure in xPression, open the Hardware Setup, select add and then choose xPression Desktop Preview. My only choices are XPression Rosslinq Connector XPression Virtual Input XPression Virtual Output There is no XPression Desktop ...

Dashboard Update Question

Posted By Marty Hill 07-30-2020 18:41
Found In Egroup: Facility Control \ view thread

We haven't updated Dashboard since we got it about 4 years ago and it is working pretty well for us, but there have been several updates since and now we do to explore the new features that have been released since. We are at version 8.1.2 and the current non Beta version is 9.1. My question is ...

RE: Controlling nk router with custom panel

Posted By Marty Hill 05-14-2020 16:34
Found In Egroup: Facility Control \ view thread

I know this is a "ye olde" comment, but I am now wanting to learn this part as well, and the example link about generates this message, "Time's up! We're sorry but the link to view this content has expired." Can this be reposted or a more current solution provided? We have needed during this COVID-19 ...

Marty Hill

Contact Details