Profile

Simon Dargaville

Contact Details

My Content

1 to 20 of 24 total

RE: Carbonite Ultra - LTC connector

Posted By Simon Dargaville 08-20-2025 21:36
Found In Egroup: Production Switchers \ view thread
All good, I've had success with GND POS NEG When using a Plura ELC, and a T568B Cable. the RJ45 Pin out = GND = 4 (BLUE) POS = 3 (WHITE / GREEN) NEG = 6 (GREEN) ------------------------------ Simon Dargaville ------------------------------

RE: Carbonite Ultra - LTC connector

Posted By Simon Dargaville 08-19-2025 22:58
Found In Egroup: Production Switchers \ view thread
Can I check if this worked out ? The manuals Neg Pos Neg Is that mean it's unbalanced? or is one of the pin's a GND ? ------------------------------ Simon Dargaville ------------------------------

RE: Media Channel 1 (M1) Playlist control

Posted By Simon Dargaville 11-25-2023 21:10
Found In Egroup: Production Switchers \ view thread
Hi Les, I went to ask this question too, re advancing Media Store playlist stills via custom controls, and found this thread.. Is this something that could be added in future firmware? For Carbonite Ultra and Solo switches ? We had a large conference in our venue last week, and ...

RE: Easiest way to retrieve source statuts through Ultrix Dashboard API.

Posted By Simon Dargaville 12-01-2022 00:09
Found In Egroup: Connectivity \ view thread
Hi Mike! Can I jump in on this and double check if this is still the case, in that there's no easy way of getting the database source/dest names in a similar fashion? Thanks Simon ------------------------------ Simon Dargaville ------------------------------

RE: Exporting Ultrix DB

Posted By Simon Dargaville 01-13-2022 02:12
Found In Egroup: Connectivity \ view thread
Thanks Mike ! That's an awesome tip ! Did the job perfectly. Cheers Simon ------------------------------ Simon Dargaville ------------------------------

Exporting Ultrix DB

Posted By Simon Dargaville 01-10-2022 17:28
Found In Egroup: Connectivity \ view thread
Hi! I was wanting to do an export of our current DB (Sources/Destinations in particular) , into something I can edit (CSV file etc), for some documentation of our facility. I can see the UDA file export option in System Status, is this file readable by any PC apps? or is there a way of exporting the ...

RE: Switcher not seeing USB drive

Posted By Simon Dargaville 11-24-2021 02:41
Found In Egroup: Production Switchers \ view thread
Can I hijack and ask what the logging to usb does ? Is it like the EDL ? ------------------------------ Simon Dargaville ------------------------------

RE: Ultrix AUX Fiber SFPs

Posted By Simon Dargaville 02-13-2021 08:09
Found In Egroup: Connectivity \ view thread
I've got fibre SFP's in ultrix ultrix slots 1,2, & 3, screenshot attached Ultrix.slot2.AUXA-out[1].sdi.ch1 etc #Ultrix

VNC for Ultritouch

Posted By Simon Dargaville 12-21-2020 09:57
Found In Egroup: Connectivity \ view thread
Is it possible to setup VNC server on the Ultritouch? + If I don't have an ULTRITOUCH-RTR License, can I load Ultrix panels? Or can I only run custom panels ? Thanks! dargs

RE: dashboard timer

Posted By Simon Dargaville 10-31-2020 23:56
Found In Egroup: Facility Control \ view thread
Hey James and Ben, I was looking for a way to do Dashboard timer, counting down from a value in an array/ table. I had added a 'duration' field to the awesome Rundown dashboard panel, and will eventually add in auto-follows hopefully.. Took me a while to work out how to use the ...

RE: DashBoard 9.1.3 is available!

Posted By Simon Dargaville 08-31-2020 01:07
Found In Egroup: Facility Control \ view thread
https://www.rossvideo.com/support/software-downloads/dashboard/ For the lazy people out there.. :) #DashBoard

RE: Help needed with Custom Controls to recall a Scene in XPression and to clear it

Posted By Simon Dargaville 06-15-2020 23:47
Found In Egroup: Production Switchers \ view thread
I don't have a switcher in front of me, but my guess is Les is just clicking/pressing the 3rd knob "Take Action" at that point. #Carbonite

RE: Third party remote control

Posted By Simon Dargaville 02-04-2020 06:43
Found In Egroup: Connectivity \ view thread
On same external control system topic, are there more RossTalk commands for Ultrix, other than the GPI Salvo trigger and Timers ? #Ultrix

Modbus

Posted By Simon Dargaville 09-03-2018 04:41
Found In Egroup: Facility Control \ view thread
Hi, Has anyone made Dashboard talk the Modbus TCP protocol? I have an Advantech Adam 6060 Relay/IO device I'm hoping to use to control a motorised screen contact closure (Up/Down) from a dashboard custom panel. I'm still working it out with putty to send raw TCP on port 502 but not ...

RE: DashBoard MediaManager keeps the thumbnails of deleted stills of Carbonite switcher

Posted By Simon Dargaville 11-28-2017 07:54
Found In Egroup: Production Switchers \ view thread
Is this still the case? I'd vote for an option to be able to refresh the database or delete files via MediaManager.. #Carbonite

RE: Sony PTZ randomly loses tilt

Posted By Simon Dargaville 07-11-2017 13:23
Found In Egroup: Production Switchers \ view thread
Don't mean to hijack this thread.. but.. we have 2 BRCH900 PTZs, and curious how to hook them up to our Carbonite to get control of them. Can i use the serial port on Carbonite to send RS422 / RS323 to Sony PTZS? Or is this via ethernet ? #Carbonite

RE: Media Channel 1 (M1) Playlist control

Posted By Simon Dargaville 09-03-2016 05:25
Found In Egroup: Production Switchers \ view thread
I'd also thought about this recently, if it was possible in the future to be able to control playlist via rosstalk / custom controls would be very handy. #Carbonite

OG3-FR Fans

Posted By Simon Dargaville 04-20-2015 12:33
Found In Egroup: Infrastructure​ \ view thread
Hi's We've got one of our OG3-FR's in the same control room space as our operators & technicians and it's front panel fans are a lot louder than I'd hoped, I have to power off the frame when it's not required, to avoid complaints from my operators. The Dashboard controls are only for auto ...

RE: NK macros in dashboard.

Posted By Simon Dargaville 02-07-2015 21:59
Found In Egroup: Facility Control \ view thread
+1 for this too. Thanks Simon #DashBoard

RE: Carbonite Chroma Key - Matte Fill

Posted By Simon Dargaville 08-06-2014 23:04
Found In Egroup: Production Switchers \ view thread
Hi James, thanks for this, I'll give it a try and let you know how I go. Not too fussed if it uses all the resources, thanks. #Carbonite