Profile

Is there a way to chnage the output frame rate of the TD2's Dashboard display port output to 50Hz ? The defaut seems to be 59 or 60 Hz. ------------------------------ Alex Hasker Dude LEX AUDIO VISUAL PTY LTD ------------------------------

Marty You need to enable the Rosstalk conenction in Companion and the switcher IP (default 192.168.0.133 from memory) and port (normally 7788) Then for example to make a ME1 preview cross point button, add this Press Action Carbonite: XPT Destination ME:1:PST Choose the souce ...

Thanks Les I think your mention of the Dashboard connection tacking on another few minutes (closer to 5- 6 minutes) to the total boot time is what I had seen as the Ultra was being control only by Dashboard - no control panel Obviously the way the thing is programmed to boot up , ...

Thanks Les I dont currently have access to one right now but I'll see if I can get hold of one myself to re-test . I mentiend the 2min 40 seconds of you units boot time and neither of two Ultra owners I know said their booted that quicky to their knowledge. ------------------------------ ...

Looking to replace our Carbonite MultiMedia with the next cool kid on the block. Ultra seems like it should be the next step but there's a few things holding us back . 1 - The boot time, last time I booted one up that I was playing with was looong, felt abnormally long. I didn't actually time it but ...

We recently acquired a Ross Ultricore RCP-ME and have it driving a Ross Carbonite Mini ME bus at this stage. We have found we have to wait nearly 3 seconds between button pushes tbefore another button can be pushed on the RCP-ME Is this considered normal or is there a setting or mode that will speed ...