Profile

Brian Watts

Contact Details

My Content

1 to 14 of 14 total

Panel Name on UltriTouch Panel

Posted By Brian Watts 10-11-2024 18:56
Found In Egroup: Facility Control \ view thread
Trying to add a logo or text field to identify each page on my UltriTouch. I have several open Panels, but distinguishing between them can be a challenge. I used the UltriTouch-PB and when I go to Panel Builder Edit Mode, it wont let me use the usual functions. ------------------------------ Brian ...

Panel Name on UltriTouch Panel

Posted By Brian Watts 10-11-2024 16:49
Found In Egroup: Facility Control \ view thread
Would like to add the Panel Name (either Text or a Graphic) to an UltriTouch Panel. I used the PreBuilt to build the original Panel. Is there a place I can add it in or do I need to build one from scratch to achieve this? Reason for it is, I have 3-4 open panels on my UltriTouch, and want to see ...

RE: Custom Dashboard Panel won't connect to Datalinq

Posted By Brian Watts 07-12-2024 14:42
Found In Egroup: Graphics \ view thread
Thanks Zach, I new it was a little button somewhere. That worked perfectly!! ------------------------------ Brian Watts Jeff Watts Productions, Inc ------------------------------

RE: Custom Dashboard Panel won't connect to Datalinq

Posted By Brian Watts 07-10-2024 13:53
Found In Egroup: Graphics \ view thread
Link for the grid file https://www.dropbox.com/scl/fi/9fqpq616p8infkwgc4bvg/Wiffle-Ball-HR-Derby.grid?rlkey=bzaiqd7cx97fhq9zgfgon6xy6&st=96q3pa8f&dl=0 ------------------------------ Brian Watts Jeff Watts Productions, Inc ------------------------------

Custom Dashboard Panel won't connect to Datalinq

Posted By Brian Watts 07-10-2024 13:52
Found In Egroup: Graphics \ view thread
Built a new (from scratch) panel to count Home runs and run a clock for a HR derby we are producing. In the past I've always used a working panel as a base, so I havent run into this problem before. I have my panel built, but it is NOT sending data to the Datalinq server, and thus not on to the ...

RE: Movie Files

Posted By Brian Watts 09-13-2017 18:33
Found In Egroup: Graphics \ view thread
I'm using PC for AE.... Is the codec not available anywhere other than installing on the offline computer? #XPression

RE: Movie Files

Posted By Brian Watts 09-12-2017 21:14
Found In Egroup: Graphics \ view thread
I have the latest AE, but not on Xpression machine, as they are often on the road in our trucks. How can I get it on my AE machine I guess is my main question #XPression

Movie Files

Posted By Brian Watts 09-12-2017 19:30
Found In Egroup: Graphics \ view thread
I'm sure this has been answered, but can't seem to find it anywhere. I render movie files out to be used in Xpression with Adobe After Effects. In order to get them to the Xpression they first have to be done as a .mov file (huge) and then transcoded through the xpression. What settings should ...

RE: Custom Control Issue

Posted By Brian Watts 10-01-2013 16:04
Found In Egroup: Production Switchers \ view thread
I'll test the USB drive when I get on the truck on Friday and will let you know how that turns out. Thanks for getting back to me. #Carbonite

Custom Control Issue

Posted By Brian Watts 09-23-2013 15:26
Found In Egroup: Production Switchers \ view thread
So I loaded a new Media wipe into the Carbonite (v7.2) switcher, built a custom Control to recall, and wipe to preview on MLE2. However, once I save it to disk, a portion of the CC does NOT get saved. If I reload the custom controls, four steps are missing. After several different ways of building the ...

Using DVE to fly Graphics

Posted By Brian Watts 08-27-2013 01:39
Found In Egroup: Production Switchers \ view thread
Have a Carbonite 2x frame, running latest upgrade. Trying to see if we can use the DVE to fly a Chyron Graphic (both the fill and key signals). As soon as I selected DVE for the type of key, the Carbonite quit using the Key signal. Is this a known limitation, or am I missing an extremely easy and obvious ...

HD MultiView

Posted By Brian Watts 09-10-2012 22:57
Found In Egroup: Production Switchers \ view thread
On our multiview, the graphics are hard to read. We are in standard def mode, if we change output of multiview to HD, to we have to change the cabling to outs 7 and 8? B

Copying Custom Controls

Posted By Brian Watts 09-10-2012 22:52
Found In Egroup: Production Switchers \ view thread
Recently, I had to build a show that did the same effect to replay, but used four different media wipes. Was there a way to load a custom control, then save it in a separate bank? I ended up building the effect exactly the same except for the media wipe 12x... got really good at it though!. B

RE: Fikles Uploaded to the swithcer

Posted By Brian Watts 02-07-2012 21:14
Found In Egroup: Production Switchers \ view thread
Is there a way to save the media files on the hard drive #Carbonite