Profile

Ryan Ellis

Contact Details

My Content

1 to 20 of 21 total

Down Convert Output of Ultrix Carbonite

Posted By Ryan Ellis 11-25-2025 09:38
Found In Egroup: Production Switchers \ view thread
We're installing an Ultrix Carbonite in a facility that will be operating in 1080p59.94. However, due to some aging infrastructure, we still need to provide a 1080i program output. Can the Ultrix Carbonite generate a single 1080i output directly from an SDPE card, or will we need to handle this through ...

RE: MultiView Outputs on ULTRIX-HDX-IO

Posted By Ryan Ellis 01-11-2024 12:22
Found In Egroup: Connectivity \ view thread
Awesome. Thanks Mike! ------------------------------ Ryan Ellis Design Engineer Diversified Atlanta United States ------------------------------

MultiView Outputs on ULTRIX-HDX-IO

Posted By Ryan Ellis 01-11-2024 10:06
Found In Egroup: Connectivity \ view thread
I hear that the multiview outputs can be on both AUX A and AUX B outputs on the ULTRIX-HDX-IO card. Is this true? ------------------------------ Ryan Ellis Design Engineer Diversified ------------------------------

RE: SONY BRC-X1000 Custom Dashboard

Posted By Ryan Ellis 07-13-2023 09:23
Found In Egroup: Facility Control \ view thread
Hey James, Thought I would come around to this again. I am not familiar with the tag and how to use it. I thumbed through the manual and didn't find too much there either. Do you have resources on how to use the tag in this situation best? ------------------------------ Ryan Ellis Design ...

SONY BRC-X1000 Custom Dashboard

Posted By Ryan Ellis 04-10-2023 12:11
Found In Egroup: Facility Control \ view thread
I'm trying to create a custom dashboard to recall presets and have simple control of the cam (PTZ, Iris, Zoom & Focus) on a Sony BRC-X1000. Normally I would open the panel builder on the camera and copy buttons to my custom dashboard but the panel builder will not open on the device. How can I code buttons ...

Timer to Trigger Salvo in Ultrix

Posted By Ryan Ellis 02-12-2023 11:29
Found In Egroup: Facility Control \ view thread
I have a facility where we blackout screens with a salvo triggered by a button on an Ultritouch. I would like to have that salvo fire after a certain time rather than right away. The goal is to blackout the screens with a salvo an hour after I leave. Is there a script or something in the visualizer that ...

RE: UltriScape Pip Formats

Posted By Ryan Ellis 10-27-2021 07:35
Found In Egroup: Connectivity \ view thread
Great news. Thanks Joe ------------------------------ Ryan Ellis ------------------------------

UltriScape Pip Formats

Posted By Ryan Ellis 10-26-2021 18:17
Found In Egroup: Connectivity \ view thread
We are planning a 4K/12G plant that will have a mix of video formats for prompters and whatnot. Will I be able to create a multiview with 4K and 1080p sources? Do they all need to be 4K? ------------------------------ Ryan Ellis ------------------------------

RE: Carbonite Panel Not Auto Following

Posted By Ryan Ellis 11-17-2020 01:46
Found In Egroup: Production Switchers \ view thread
Hey Les. Yea, the mini menu on our pane is t following anymore. It’s the only pane on that switcher. #Carbonite

Carbonite Panel Not Auto Following

Posted By Ryan Ellis 11-16-2020 20:59
Found In Egroup: Production Switchers \ view thread
We have a Carbonite Ultra and a 2S panel. The panel is not auto following on the transition area or when I preview an input that has device control. Any ideas?

RE: Carbonite Ultra Dashboard connection not opening

Posted By Ryan Ellis 07-28-2020 03:19
Found In Egroup: Production Switchers \ view thread
Are you on wifi? I usually have this issue when my laptop is not harlined into the network. #Carbonite

RE: Ultricore RCP qe36

Posted By Ryan Ellis 06-27-2020 12:56
Found In Egroup: Connectivity \ view thread
We had this happen a few times when the Ultrix and RCP were on different switches. The switches were connected via a 1G fiber link with a lot of devices on each end. When there was a lot of KVM activity my RCP's would give me the same message. Once I upgraded our SFP link between the switches to 10G ...

RE: Ultrix Layout Edit

Posted By Ryan Ellis 05-18-2020 20:40
Found In Egroup: Connectivity \ view thread
Pip A and B need to match what’s selected on the configuration page. C can be whatever size is available but you’re only able to have one pip of the C size in a layout. #Ultrix

RE: Ultrix Layout Edit

Posted By Ryan Ellis 05-18-2020 20:22
Found In Egroup: Connectivity \ view thread
Looks like your system is setup to use 1/4 and 1/2 pip sizes. When it comes to the third size, you can only have 1 pip of the C size. #Ultrix

Show Source of Carbonite Keyer in Dashboard

Posted By Ryan Ellis 04-24-2020 20:26
Found In Egroup: Facility Control \ view thread
So I have gone in and created this custom dashboard for one of our producers to use. I simply used buttons from the Carbonite Live Assist and changed their labels and colors based on what is active or not. The only thing I want to do now is display what source is in that key's fill channel. I tried moving ...

How do you manage audio with MADI?

Posted By Ryan Ellis 04-18-2020 00:51
Found In Egroup: Connectivity \ view thread
We have a lot of sources that use 2 channels of audio, most use 8 channels but we do have a couple that use 16. I'm thinking of splitting our MADI port into 8 channel groups destinations but can't really think about how that would work for sources/destinations that need all 16 channels of audio. ...

MIRA Codec

Posted By Ryan Ellis 03-25-2020 16:36
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Is there a codec I can plug into Media Encoder for Mira? We're finding that the machine can't turn clips around fast enough for us.

RE: Carbonite GPI should trigger a ultrix

Posted By Ryan Ellis 02-25-2019 19:25
Found In Egroup: Production Switchers \ view thread
@lesoreilly if I could bug you on this one. When I go to setup the device in my panel; I select RossTalk but I am not able to change the sub type to Generic. It is stuck on "xpression_1.0". Any ideas on why I am not able to change this to generic? SW Version is 12.3.0.16564. Thanks #Carbonite

One channel not recording LTC

Posted By Ryan Ellis 02-25-2019 19:04
Found In Egroup: Video Servers & Replay Systems​ \ view thread
My channel B is not reading/recording the LTC. All settings are set correctly. When I hit record, the timecode starts recording from 00:00:00:00. Any ideas?

RE: "Protd By002" Error on RCP-QE36 Panel

Posted By Ryan Ellis 02-20-2019 18:20
Found In Egroup: Connectivity \ view thread
NVM. Figured out that it freaks out when your salvo tries to recall a destination that is protected. All good now. #Ultrix