Profile

Carbonite Ultra Update

Posted By Shamil Gasim 02-03-2026 10:07
Found In Egroup: Production Switchers \ view thread

Hi,there. We have recently upgraded our Ross Video Carbonite Black+ to the latest firmware version (v15.6). The upgrade was successful, and we observed that several previously encountered issues were resolved. We are now planning to upgrade another vision mixer, Ross Video Carbonite Ultra, to the ...

RE: Tally Output

Posted By Shamil Gasim 05-19-2025 11:33
Found In Egroup: Production Switchers \ view thread

Thanks for reply. By means of crucial 24/7 On-Air schedule we are still on version 3.0. of Ultra Frame , is this section of the DashBoard Menu available on this firmware version ? or Should I update the frame to the latest version of the Ultra Frame ( v 9.0.) ? if yes Can I update it to the ...

Tally Output

Posted By Shamil Gasim 05-19-2025 01:53
Found In Egroup: Production Switchers \ view thread

Hi, there. We recently had to reassign CAMERA 1 input from physical input 1 to physical input 9. To achieve this, we mapped the first button(previously Physical Input1) on Panel (Carbonite Black 1 ME) to be physical input 9. However, we overlooked moving the tally output wiring from output 1 to output ...

RE: TouchDrive TD2

Posted By Shamil Gasim 02-25-2025 04:28
Found In Egroup: Production Switchers \ view thread

Thank you. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

TouchDrive TD2

Posted By Shamil Gasim 02-24-2025 07:14
Found In Egroup: Production Switchers \ view thread

Hi, there. Recently, we have faced a problem with Rossvideo TouchDrive TD2. We have assigned CAM1 to the 1st button of the ME 2( P/P Row ). The 1st button of the Program row working as it should , whereas 1st button of the Preview row of the ME 2 ( P/P Row) does not respond any push, we have carried ...

Notifications from the frames

Posted By Shamil Gasim 11-30-2024 07:30
Found In Egroup: Production Switchers \ view thread

Hi, there. The question might be out of the discussion theme, so please bear with me. We have 2 Carbonite Black Frame, an Ultra Frame and Panels(TouchDrive and Black 2 ME) on the premise. I know that by using DashBoard the statuses of the gears can be checked(Power, Network, Cooler etc). ...

RE: Control DVE Keys

Posted By Shamil Gasim 09-20-2024 08:38
Found In Egroup: Production Switchers \ view thread

Thanks for the clarity. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

Control DVE Keys

Posted By Shamil Gasim 09-15-2024 05:08
Found In Egroup: Production Switchers \ view thread

Hi, there. We do have Carbonite Black 1 ME Panel and TouchDriver TD2 Panel. Is ther any way to control DVE Keys at the same time ? to elucidate I created 2 DVE Keys and would like to control their size, x and y positions , etc at the same time from the panel , I was wondering is it possible to accomplish ...

RE: ViewControl on Simulator

Posted By Shamil Gasim 06-07-2024 08:58
Found In Egroup: Production Switchers \ view thread

Thanks for reply. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

ViewControl on Simulator

Posted By Shamil Gasim 06-07-2024 05:14
Found In Egroup: Production Switchers \ view thread

Hi, there. Recently, I have downloaded and tested Carbonite Ultra OVA Simulator and really thankfull for whom created that. As I go through the simulator there appeared the question that I could not find the answer, the question is , is it possible to view internal sources such as Media Stores files ...

RE: DVE Edge

Posted By Shamil Gasim 01-22-2024 11:30
Found In Egroup: Production Switchers \ view thread

Thanks. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

DVE Edge

Posted By Shamil Gasim 01-22-2024 09:27
Found In Egroup: Production Switchers \ view thread

Hi, there. We do use RossVideo Carbonite Black+ and Ultra. I have created 2 Boxes and would like the edges of DVE boxes to be rounded by percentage, I have gone through DVE menus and did not find any function to make edges smooth round, skew DVE. I do know that there is SLAB function in XPression Desginer ...

RE: Visual Basic windows forms app

Posted By Shamil Gasim 11-05-2023 03:12
Found In Egroup: Facility Control \ view thread

Thanks.

Visual Basic windows forms app

Posted By Shamil Gasim 11-03-2023 05:08
Found In Egroup: Facility Control \ view thread

Hi, there. This might be silly question. We do use DashBoard Custom Panels to control out Carbonite Ultra , Black and Black+ switcher by using RossTalk protocol. I was wondering is that possible to send RossTalk commands from Visual Basic Window Forms App(.exe) to switchers? Thanks in advance. ...

RE: External Device

Posted By Shamil Gasim 04-14-2023 06:35
Found In Egroup: Facility Control \ view thread

Thanks for your precious recommendations. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

External Device

Posted By Shamil Gasim 04-07-2023 08:31
Found In Egroup: Facility Control \ view thread

Hi, there . I would like to make a connection between DashBoard and a video switcher in order to send GPI from DashBoard to a switcher in order to trigger Macro action. How it can be accomplished ? is it possible to utilize USB to GPIO to do it ? if yes which device can be used ? is ...

TSL 3.1

Posted By Shamil Gasim 02-24-2023 10:18
Found In Egroup: Production Switchers \ view thread

Hi, there. We do have RossVideo Switchers , and one of them is Carbonite Black Plus. I would like to connect TSL UMD with Multiviewer. The multiviewer is Harris 6822+ QVM6800+ and support TSL , TSL 4.0 and TSL 5.0 . As I read through the manual of Carbonite Black it supports TSL 3.1 and I was wondering ...

RE: Carbonite Frame

Posted By Shamil Gasim 02-24-2023 04:25
Found In Egroup: Production Switchers \ view thread

Thanks for your help. The Frame was Upgraded. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

BMD Teranex 2D

Posted By Shamil Gasim 11-24-2022 07:29
Found In Egroup: Facility Control \ view thread

Hi, there. I would like to control Blackmagic Design Teranex 2D via DashBoard. I have tried numerous coding to change Video Output Mode, whereas I have failed. Can someone share his/her knowledge in terms of it ? Thanks in advance. ------------------------------ Shamil Gasim ...

RE: Parsing an XML file and using the Elements in DashBoard

Posted By Shamil Gasim 09-28-2022 06:35
Found In Egroup: Facility Control \ view thread

Hi, Ryan. Could you attach GRID file, please? Thanks. ------------------------------ Shamil Gasim TV and Radio Engineer ------------------------------

Shamil Gasim

Contact Details