Profile

Boris salhaji

Contact Details

My Content

1 to 20 of 38 total

Dashboard panel induce aliases

Posted By Boris salhaji 11-24-2025 12:14
Found In Egroup: Facility Control \ view thread
HI, I would like to create a text box in which I can type a label en then have a apply button to induce that label into an alias. I know how to induce a label into a remote ID but I can't find the code to induce it into an alias. The basic usage is to have UMD on Ultriscape configured ...

RE: Triggering tally's

Posted By Boris salhaji 11-17-2025 16:13
Found In Egroup: Connectivity \ view thread
Thanks so much David, Yes I know BCS and Ultricore Tally… we have a system tuning with this. but for another setup we don't want to connect 2 switchers to the ultrix and the ultriscape. to be more more specific, in this other setup, I have a master control room which send me a trigger ...

Cooling the Ultrix FR5

Posted By Boris salhaji 11-10-2025 13:18
Found In Egroup: Connectivity \ view thread
Hi, We consider to have a better cooling environment for our Ultrix FR5 which is in flightcase. Could you confirm that the FR5 draws fresh air from right to left ? In that case would it be a good idea to blow cold air on the right side ? We also have an Ultricool just above the router. ...

RE: Triggering tally's

Posted By Boris salhaji 11-10-2025 13:10
Found In Egroup: Connectivity \ view thread
UP ------------------------------ Boris salhaji EIC France Télévisions ------------------------------

Triggering tally's

Posted By Boris salhaji 11-05-2025 17:17
Found In Egroup: Connectivity \ view thread
Hi, certainly a basic question but I never tried this… I have an FR5 with ultriscapes and SDPE blade in Acuity mode… (no Ultricore BCS) I was wondering if I would be able to use the GPIO sub D connector of one of the sdpe blades to connect external GPI (contact closure) and so trigger ...

RE: Using Video files into Xpression

Posted By Boris salhaji 09-05-2025 01:53
Found In Egroup: Graphics \ view thread
Great ! and where can I find the codec installer? on my Xpression frame itself or is it downladable? Best regards, ------------------------------ Boris salhaji EIC France Télévisions ------------------------------

Using Video files into Xpression

Posted By Boris salhaji 09-04-2025 12:13
Found In Egroup: Graphics \ view thread
Hi, We are using a project in wich we load videos as graphics. We need to use video encoder to transcode the media and to make it work in Xpression. Is there a way to get the codec directly into the NLE software ? So we would be able to directly export medias with alpha in the right codec and the ...

Ndi recorder

Posted By Boris salhaji 07-17-2025 18:00
Found In Egroup: Facility Control \ view thread
Hi, Iwas wondering if somebody had thinking of creating a custom panel to record NDI streams using dashboard as GUI and ffmpeg or equivalent to encode.there are third party apps doing this but as Ultrix is NDI friendly, carbonite code as well it could be fun to have such features controlled by dashboard. ...

RE: question for the creatives ones !

Posted By Boris salhaji 03-04-2025 05:19
Found In Egroup: Production Switchers \ view thread
Hi, Any news on this topic ? It is not critical but I would like to know if there is a misoperation on my side or if there is something related to the switcher. Best regards, Boris ------------------------------ Boris salhaji EIC France Télévisions ------- ...

RE: question for the creatives ones !

Posted By Boris salhaji 02-20-2025 17:36
Found In Egroup: Production Switchers \ view thread
Thank so much Les ! I tried to make the effect following the steps you explained but I'm still stuck at some point. just a reminder I'm operating a Ultrix Acuity with a TD2S panel. so I can make the BW I can make the Chroma key. It lock well the color I pick. I ...

RE: question for the creatives ones !

Posted By Boris salhaji 02-19-2025 14:23
Found In Egroup: Production Switchers \ view thread
Hi me again... Simple question regarding this topic, is there a way to key invert a chromakey? It is possible to display the alpha channel of a chromakey but is there a way to get it as a source ? Best regards ------------------------------ Boris salhaji EIC France ...

question for the creatives ones !

Posted By Boris salhaji 02-18-2025 13:56
Found In Egroup: Production Switchers \ view thread
Hi, Just for the record I'm operating an Ultrix Acuity 3MEs... I want to make this effect : the image is B&W with only one color still present like red for exemple so evrything which is red keep its chroma and the rest is B&W. this effect must be applied on the PGM (it potentially can ...

RE: why am i suddenly getting a breakaway error 492 when rerouting with a push button panel?

Posted By Boris salhaji 02-18-2025 13:08
Found In Egroup: Production Switchers \ view thread
HI, I don't know if it could but I already get this error, once it was because of levels as mentionned by Les, once it was after an upgrade because the ultrimix option allowing audio shuffling (in the licences section of the ultrix) was disabled. hope I could help... ...

RE: Ultriscape

Posted By Boris salhaji 02-05-2025 05:28
Found In Egroup: Connectivity \ view thread
Hi Mike, Thanks for the answer ! I assumed it was somthing like that. What I read is "yet" so "wait and see" :) best regards ------------------------------ Boris salhaji EIC France Télévisions ------------------------------

RE: Ultriscape

Posted By Boris salhaji 01-31-2025 02:10
Found In Egroup: Connectivity \ view thread
Hello everyone, To add to the topic... We recently upgraded another system composed of an FR5 and Ultrix Acuity. So now in V 6.3 we have access to PIP C and PIP X. When we try to assign a ME output of the Ultrix Acuity we got the same warning message "invalid size" but we can route Auxes ...

RE: Ultriscape

Posted By Boris salhaji 01-07-2025 10:39
Found In Egroup: Connectivity \ view thread
Hi Brandon, Thank you ! Axel from Ross France just gave me the trick few hours ago :) I didn't know this limitation... so that's why i had the issue it is now solved ! I was sure it was me doing wrong and not Ultrix ! it is never Ultrix btw. Thanks again ! Have ...

RE: Ultrimix DANTE

Posted By Boris salhaji 01-07-2025 10:34
Found In Egroup: Connectivity \ view thread
Hello Everybody, Thanks for your help ! Thanks Ed for the step by step. As I said it is working even if there is a glitch on the DHCP. It seems to not gate a proper Apipa adress range... But we fix the problem by giving static adresses on dante equipments... The DHCP issue we ...

Ultriscape

Posted By Boris salhaji 01-05-2025 05:53
Found In Egroup: Connectivity \ view thread
Hello everyone, before bothering Ross experts with something which seems to be not an issue I ask my question here… we are used to Ultriscape operations and we were thrilled to discover in version 6 that we got an extra PIP size. And precisely with this new feature we configured ...

RE: Ultrimix DANTE

Posted By Boris salhaji 01-05-2025 05:25
Found In Egroup: Connectivity \ view thread
Hi, just to keep the community up to date Ultrimix Dante is working now thanks to the help of Ross experts. There is still a thing to adress on our side but it's okay… Thank you team Ross! ------------------------------ Boris salhaji EIC France Télévisions ------------ ...

Ultrimix DANTE

Posted By Boris salhaji 01-02-2025 12:11
Found In Egroup: Connectivity \ view thread
Hi, I'm configuring a brand new FR2. I declare destinations and sources, audio of SDI embeded as well, I'm able to route audio sources from SDI to destinations and so perfom shuffling. So far so good ! We got the Ultrimix Dante licence and the SFP Aux Port on slot 1 Aux C. it is well configured ...