Profile

Robert Kinnan

Contact Details

My Content

1 to 11 of 11 total

RE: Using Ultrix Router to make a Custom Embedder

Posted By Robert Kinnan 10-13-2025 07:26
Found In Egroup: Production Switchers \ view thread
After speaking with a colleague, we were able to build an ISO audio router using Dashboard. Maybe this will help someone else. In Dashboard, in our database we added a Multibus panel. We did this on our Control room An Ultrix frame since all of our cameras were already there. In our current destination ...

Using Ultrix Router to make a Custom Embedder

Posted By Robert Kinnan 10-09-2025 05:16
Found In Egroup: Production Switchers \ view thread
Hello. To set this up. We currently have 2 FR5 Ultrix frames in Acuity mode, each connected to a TDx3 panel. We are primarily using this as a switcher as our main router is an Evertz router. We run audio mainly through Dante using an SSL. Looking to see if I can use the Ultrix essentially as custom ...

GPO Setup - Basic Contact Closure

Posted By Robert Kinnan 09-12-2025 11:57
Found In Egroup: Production Switchers \ view thread
Hello. Looking to setup a simple GPO coming from GPO connector on my ME3 blade. Basically how would I set this up to fire off of a CC? Let me know if you need any additional details for the process. Thanks ------------------------------ Robert Kinnan Broadcast Engineer Spectrum Charter News -- ...

Roll Clip Button using Tria

Posted By Robert Kinnan 07-21-2025 12:50
Found In Egroup: Production Switchers \ view thread
Hello. We currently just installed our second TDx3 in Acuity mode in our control room A over the weekend. An issue I am seeing is related to using the roll clip button. I have a Tria connected via VDCP. I know its connected as I can refresh the clips and see, cue, and play clips from the Tria. ...

RE: Copying Media Stills to USB from Vision Switcher

Posted By Robert Kinnan 07-07-2025 11:26
Found In Egroup: Production Switchers \ view thread
Hello. Thank you. I was able to FTP to the current frame. 2 questions now: 1. Do we need to keep a USB drive on the TDx3 for storing stills when dealing with Acuity and or Ultrix systems? 2. For the ftp address, are we using the frame, Acuity or panel IP? Thanks ------------------------------ Robert ...

Copying Media Stills to USB from Vision Switcher

Posted By Robert Kinnan 06-26-2025 09:04
Found In Egroup: Production Switchers \ view thread
Hello. We are transitioning from Vision to Acuity and need to copy all of our Stills from the old unit to the new. Will be using a USB formatted in FAT32. When we check, we see the option to copy from the USB drive, not copy to the USB. Any help is appreciated. ------------------------------ ...

RE: Controlling Cobalt Frame Card from Acuity TDx3 Switcher

Posted By Robert Kinnan 06-20-2025 10:25
Found In Egroup: Production Switchers \ view thread
Hello, Les. Wanted to thank you for the previous example. Was able to setup the custom dashboard, based on your example and control the dropdown options. Especially once I understood the inspection mode. That was a big help. The only item I have left is how to properly setup the Com settings for the ...

RE: Controlling Cobalt Frame Card from Acuity TDx3 Switcher

Posted By Robert Kinnan 06-17-2025 12:38
Found In Egroup: Production Switchers \ view thread
Hello, Les. Just wanted to see if you received my link to my card. Sent it on a private reply. Been learning from your post you but still have questions. Thanks ------------------------------ Robert Kinnan Broadcast Engineer Spectrum Charter News ------------------------------

RE: Controlling Cobalt Frame Card from Acuity TDx3 Switcher

Posted By Robert Kinnan 06-13-2025 05:32
Found In Egroup: Production Switchers \ view thread
With what you said, I created a blank panel using xml (not sure if correct). Then I put my opengear card side by side with the new blank panel. I put both in edit mode and dragged the option I needed to the new panel. This worked. I had said before that what I was dealing with was an A/B switch but ...

RE: Controlling Cobalt Frame Card from Acuity TDx3 Switcher

Posted By Robert Kinnan 06-12-2025 12:36
Found In Egroup: Production Switchers \ view thread
Thank you for your reply. If we wanted to trying this, what would be the process to build this? Would we open a support ticket? Thanks ------------------------------ Robert Kinnan Broadcast Engineer Spectrum Charter News ------------------------------

Controlling Cobalt Frame Card from Acuity TDx3 Switcher

Posted By Robert Kinnan 06-12-2025 11:38
Found In Egroup: Production Switchers \ view thread
Hello. Currently, for context, we are installing two new FR5 Ultrix routers, each connected to a TDx3 in Acuity mode. We have all of our systems setup and commissioned in Dashboard. We have several Cobalt color correcting cards in an Open Gear frame on the same network as the ROSS equipment. I have ...