Profile

Isabelle Berthiaume

Contact Details

My Content

1 to 18 of 18 total

RE: Tria export settings + video frame rate

Posted By Isabelle Berthiaume 07-03-2025 12:09
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Steven, Mira display the format in Frequency and most of the editing system will display the format in Frames per Second. So 1080i 59.94Hz is the equivalent of 1080i 29.97fps. Both are correct, it's just different conventions. Thanks, Isabelle ------------------------------ Isabelle ...

RE: Two Tria Questions - Scheduled Recordings and Clip Loading

Posted By Isabelle Berthiaume 05-15-2025 08:40
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Nathan, To schedule recording, you can take a look at Powerplay: https://www.rossvideo.com/control-systems/enterprise-control-systems/powerplay/ When we talked about loading clips, you mean the progress bar in Tria Import? So it stop at 50% but in reality the clip is fully loaded? ...

RE: Mira+ Replay - 7 channel ganged?

Posted By Isabelle Berthiaume 03-21-2025 08:50
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Nick, This is not possible in the current software. Thanks ------------------------------ Isabelle Berthiaume Senior Demo & Training Product Specialist Prime, Video Servers Ross Video Montréal ,Canada ------------------------------

RE: Mira+ Replay - 7 channel ganged?

Posted By Isabelle Berthiaume 03-20-2025 10:48
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hello, No need of a 12 channels Mira+. You can review the clips synch with 1 output. With Mira. when you save a clip, you save all of the angles with the exact same timecode. So when you load the clip in you PGM you can easily change the angle by toggling the Soft Keys to change the angle. ...

RE: Tria+ write timecode and timecode external tc Starting on first frame

Posted By Isabelle Berthiaume 03-18-2025 09:55
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Vic, You can connect external LTC timecode to your Tria+ using the XLR connector on the back of the chassis. You'll be able to record with LTC in : External TC - First Frame Only - the clip uses the external timecode data of the first field/frame that was originally recorded with ...

RE: MELTING PLAYLISTS

Posted By Isabelle Berthiaume 02-17-2025 16:29
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Greg, If the playlist got exported once, you will need to reset the melt flags before exporting it again. Go to Playlist Edit mode (by pressing the Playlist button), EDIT Item Flags (SK 10), and RESET All Melt Flags (Shift+SK 10). I hope that helps! Thanks, Isabelle ...

RE: Tria Playlists via Custom Dashboard Panel

Posted By Isabelle Berthiaume 12-05-2024 14:13
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi AJ, If you want, I can do a quick remote session with you. I might have a DB panel that pretty much do what you are asking here. If you want to reach out directly to me: isabelle.berthiaume@rossvideo.com Thank you, Isabelle ------------------------------ ...

RE: MIRA RECORDING DURATION ISSUE

Posted By Isabelle Berthiaume 11-05-2024 12:14
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Greg, Unfortunately there is no easy way to do that. The only way to keep the content without losing any Clip Register clipping and Playlists you have created is to record the ISO4 from the SDI OUTs of one machine into another (or into another set of 4CH SDI INs of the same machine, ...

RE: Update from Mira+ 9.0.1 to 9.3.1 doesn't work

Posted By Isabelle Berthiaume 09-21-2024 16:00
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Joern, Assuming that the wrong software got install first, you will need to fully uninstall Mira and install this version: Mira+ 9.3.1 You also need to make sure that you have the correct license to run this version. As Marsha mentioned, I would also recommend you contact Tech Support. They ...

RE: Mira Express Default Settings

Posted By Isabelle Berthiaume 09-19-2024 01:48
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Jim, To playback a playlist with dissolve, you need to have the gang button selected before loading and playbacking your playlist. In the User Setup menu (buttons Mark and Scroll pressed at the same time) there is a setting to force playlists to always load and play in PVW/PGM and another ...

RE: Do the Tria+ DisplayPort outputs use the Display Port MST ?

Posted By Isabelle Berthiaume 07-25-2024 14:15
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Doug, Thank you for the info. So the DP on the recent Tria+ chassis are 1.4. So if your extender/monitor and KVM support MST, you should be good. Thanks, ------------------------------ Isabelle Berthiaume Demo Artist and Trainer - Video Servers Product Prime Ross Video ...

RE: Do the Tria+ DisplayPort outputs use the Display Port MST ?

Posted By Isabelle Berthiaume 07-25-2024 10:49
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Doug, There are 4 mini display port on the back of the chassis. If you go to the website below, click on Tria+ Hardware Quickstart, you'll get a drawing of the back of the chassis. https://help.rossvideo.com/tria/Topics/Intro/Getting-Started.html Feel free to reach out if you ...

RE: Dashboard 9.9 & Mira +

Posted By Isabelle Berthiaume 04-23-2024 18:40
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Bonjour Brad, Thumbnails from the Video Servers are not available in Dashboard. But, as Dashboard supports NDI feeds, I know that you can use a NDI adapter plugged to a Mira output to get a preview in Dashboard. This Dashboard U video show you how: https://www.rossvideo.com/res ...

RE: Dashboard 9.9 & Mira +

Posted By Isabelle Berthiaume 04-23-2024 09:30
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Brad, Thank you for your message. Can you tell me more about the features that stop working around 9.4? There is a date issue that the team is working on, but please, let us know if you find anything else so we can work on it. Here's a link where the Dashboard release Notes ...

RE: Can't see full clip list in switcher using AMP

Posted By Isabelle Berthiaume 06-15-2023 07:43
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Tim, Can you see the clip list in the Clip Library when you select "Cuable Local" ? That might be a format issue. If you want to send me an email, I can remote in later to take a look. Thanks, Isabelle isabelle.berthiaume@rossvideo.com ------------------------------ ...

RE: gang record

Posted By Isabelle Berthiaume 03-09-2023 08:58
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Jeremy, They best way would be to set the Tria+ in ISO4. That way you will record 4 feeds on 1 channel. Then you can send an AMP command from your Carbonite to trigger the recording. This can also be achieve by using Dashboard. Thanks, Isabelle ------------------------------ ...

RE: Tria export to MXF, playback in VLC

Posted By Isabelle Berthiaume 01-22-2023 13:37
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi Goran, Tria exports audio tracks as individual "mono tracks" only. It's the same for all of our Video Servers. Thanks, Isabelle ------------------------------ Isabelle Berthiaume Demo Artist and Trainer - Video Servers Product Prime Ross Video Montreal Canada ---------------------- ...

RE: Best Way To Transcode Clips Already on a Tria+

Posted By Isabelle Berthiaume 05-26-2022 12:23
Found In Egroup: Video Servers & Replay Systems​ \ view thread
Hi David, Unfortunately, there is no way to convert in Tria+. You can reimport the original clips or you can export the clips that you have in Tria+ in .mxf, then reimport them while running the Tria+ in 1080p. I hope that help. Thanks! ------------------------------ Isabelle Berthiaume ...